AEG MRC 4121: English

73

English

4. Press the ALARM 1 button for confirmation. The minutes start to flash.

5. Use the buttons / DST/C-F and / Y-M-D for setting.

6. Now select the days you want the alarm to sound. The following selections can be

made:

• 1-5=MondaytoFriday

• 1-7=MondaytoSunday

• 6-7=SaturdayandSunday

• 1-1=Weekday

6a. When you have selected the setting 1-1:

1. Press the ALARM 1 button to select the weekday.

2. Make your selection with the buttons

/ DST/C-F and /Y-M-D.(1=Monday,

2=Tuesday,3=Wednesday,4=Thursday,5=Friday,6=Saturday,7=Sunday)

7. Press the ALARM 1 button to confirm. Then select how you want to be awakened.

Select from:

• “bu” (buzzer):

A buzzer sounds when the alarm time is reached. The buzzer interval increases

from slow to fast. The volume cannot be adjusted.

• Radio frequency is displayed:

As soon as your set alarm time is shown, the radio switches on. The last set station

is played. The volume increases slowly to the set volume. The volume cannot be

adjusted.

NOTE:

Thealarmfunctionturnsoffautomaticallyafter30minutesuntilthenextday.

7a. Ifyouwanttobeawakenedbyaradiostation,selectthemaximumalarmvolumeusing

the

/ DST/C-F and / Y-M-D buttons.

8. Finally, press the ALARM 1 button again. The first alarm time is now activated.

To set the second alarm time, repeat the above steps with the ALARM 2 button (3).

NOTE:

• Ifthealarmtimeisactivated,thecorrespondingpointlightsupnexttoAL1(17)or

AL2 (12).

• Tobrieydisplaythesetalarmtimes,

- Press the ALARM 1 or ALARM 2 button.

- Passyourhandovertheinfraredsensorstwoorthreetimes.Thepointnextto

AL1 (17) or AL2 (12) lights up. The distance between your hand and the sensors

shouldbemax.10cm.