AEG MRC 4121: English

75

English

Nap alarm

The nap alarm can be used for e.g. a short “nap”. The function only operates in standby.

• PresstheMEM.SET/NAP/M+buttonrepeatedly(1)toselectthetimeafterwhichthe

device will beep. Select from 90 to 10 minutes or OFF

• Aftertheselectedtimehaselapsed,anincreasinglyfastbeepwillsound.Usethe

button (9) to turn off the beep.

Projection

With this unit, you can project the time onto a wall or the ceiling.

• YoucanswitchthisfunctiononandoffwiththeON/OFF/PROJECTIONbutton(24).

• Rotatetheprojector(20)tothedesiredposition.

• Therearoftheprojectorhasasettingwheel(22)withwhichyoucanadjustthesharp-

ness of the projection.

• Youcanusethe180°FLIPbutton(23)toiptheprojectionby180degrees.

Cleaning

CAUTION:

Do not dip the appliance in water.

• Removetheplugbeforecleaning.

• Cleantheappliancewithaslightlyhumidclothwithoutanyadditives.

Trouble-shooting

Problem Cause Solution

The unit cannot be

The unit is blocked and

Press the RESET button (see page 71

operated

“hangs”

“Restore factory defaults”). The settings

made thus far will be lost.