AEG KRC 4361 BT: English

36

English

5. Press the TIME SET/COOK TIMER button for confirma-

Bluetooth Function

tion. The minute indicator will flash on the display.

6. Adjust the setting with the SKIP+/SKIP- buttons (7/8).

Bluetooth involves a technology for wireless radio connec-

7. Save the time setting by pressing the TIME SET/COOK

tion of devices over a short distance. Devices with Bluetooth

TIMER button again.

standard are transmitting between 2.402 and 2.480 GHz in

the ISM band (Industrial, Scientific and Medical). Interference

Adjusting the volume

canbecausedforexamplebyWLAN-networks,DABradios,

Use the VOL+/VOL- buttons (9) to adjust the volume.

cordless phones, or microwave ovens which work on the

same frequency band.

Display brightness

This device offers you the possibility to use a Bluetooth-

YoucanusetheSNOOZE/DIMMERbutton(15)toadjustthe

enableddevice.Thefunctionalradiusislimitedtoapprox.

brightness of the display and of the light strip beneath the

15 metres depending on the surroundings and the unit used.

operating keys.

If your playing device supports the A2DP profile (Advanced

Audio Distribution Profile) and has a music-player function,

Listening to the radio

then you can also wirelessly transfer music to the device. The

A2DP profile involves a multi-vendor Bluetooth profile. By

Scanning stations

streaming, stereo-audio signals are wirelessly transferred be-

1. Use the

/FUNC. button (10) to select the radio mode.

tween the playing device (source) and the receiving device.

2. Tune the desired stations with the SKIP+ (7) and SKIP- (8)

To be able to remotely control the source, the playback de-

buttons. When holding down either of the buttons, the

vice must support the AVRCP profile (Audio Video Remote

devicewillstartscanninguntilthenextradiostationis

Control Profile).

found. The display will show the respective frequency.

Due to the different device manufacturers, models, and

3. If there is interference on the received station, try to

software versions, a full functionality cannot be guaranteed.

improve the reception by rotating, winding or unwinding

the wire antenna.

Logging on devices (Pairing)

Presetting radio stations

Before you listen to music via the unit, you must pair the

devices.

The device can preset up to 30 radio stations. To preset a

station, follow the steps below:

1. Ensure, that the Bluetooth function is activated in your

player (e.g. mobile phone). For this, refer to the operation

1. Search for a station as described in “Scanning stations”.

manual of your player.

2. Press the ANSWER/PROG/AMS button (6). The display

2. Press the

/FUNC button (10) repeatedly, until “bt” is

will show PROGRAM and the respective preset location

shown on the display. The BT indicator light (5) blinks.

will begin to flash.

This signalizes that the device is in pairing mode.

3. Use the PRE.+/ALARM 2 (12) and PRE.-/ALARM 1 (13)

3. Choose the Bluetooth menu in your player and register

buttons to choose the preset location for the correspond-

the device in your player. For this, refer to the operation

ing station.

manual of your player. The device “KRC 4361 BT” will

4. Press the ANSWER/PROG/AMS button again. The

show in your player as a selection.

station will be preset. The PROGRAM indicator and the

preset location will disappear.

NOTE:

Only one playback device may be connected to the

Recalling preset radio stations

device at one time. If the device is already connected

Use the PRE+/ALARM 2 (12) and PRE-/ALARM 1 (13) buttons

to another playback device, then the device will not

to select the memory locations.

appear in the BT selection menu.

4. Now enter the password “0000” in your player, depend-

Automatic station scan

ing on the device manufacturers, model, and software

Important! Any previously stored radio stations will be over-

version.

written.

If the pairing was done successfully, a beeping sound can

When holding down the ANSWER/PROG/AMS button (6) for

be heard and the BT indicator light will be lit. For the further

approx.3seconds,thedevicewillstarttheautomaticstation

procedure, please refer to the user manual of the playback

scan searching the entire frequency range automatically for

unit.Ifpossible,adjustthevolumeoftheexternalunittoa

stations. The stations found will be stored on the preset loca-

comfortable level.

tions 1-30 in ascending order.

NOTE:

The order cannot be changed once set.