Pioneer PD-30-K: Using advanced functions
Using advanced functions: Pioneer PD-30-K
Using advanced functions 05
English
DeutschFrançais
Italiano Español Русский
Nederlands
11
En
S.RETRIEVER
PURE AUDIO
SACD/CD
DIMMER
PD-30_PWSYXZT8.book 11 ページ 2012年5月7日 月曜日 午前11時33分
Chapter 5:
Playback functions
Using advanced functions
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions
cannot be used. Check the usable functions on the table below.
The functions that can be used differ according to the
1 Press the
SACD/CD
button.
Disc/file type
type of disc and file. In some cases, some of the
Input changes to SACD/CD.
functions cannot be used. See Playback functions on the
Function
1
SACD CD-DA
WMA
right column.
DSD
4
2 In the stop mode, press the SACD/CD
CD-R/-RW
2
MP3
AAC
3
button.
Each time the button is pressed, the playback alternates
Fast forward/Fast reverse
Playing with high-fidelity sound
between the CD area and SACD 2 channel area.
Skip function
Note
Sound Retriever
Direct search
––
(designate a specific track for playback)
When compressed sound signals are decompressed for
• This unit does not support SACD multi-channel
playback, some parts experience dropouts. By setting
areas.
Repeat playback
the sound retriever function to ON, compensation is
added for those losses, thus producing richer, more
Random playback
sumptuous sound.
Adjusting overall display illumination
Programmed playback
––
• Press the S.RETRIEVER button.
This unit is equipped with a dimmer function to allow the
(Play tracks in a predetermined order)
Each time the button is pressed, the function
display illumination to be adjusted in three levels,
View disc data
will change as follows: S.RTRV: OFF S.RTRV: LOW
responding to differing levels of ambient lighting. The
S.RTRV: HI Returns to original status
factory default is the brightest setting.
Sound Retriever
–– –
• The sound retriever function is disabled when the
Pure Audio
• Press the
DIMMER
button.
5
pure audio function is ON.
Each time the button is pressed it the brightness
SACD/CD
6
–––
cycles through the three levels.
Pure Audio
• The dimmer setting cannot be changed when a
1 Some functions may not work for some discs or files, even if indicated [] on the table.
This function disables digital audio output and plays
disc is playing with the pure audio function ON (see
2 Also see Playback of CD-R/CD-RW discs on page 12.
analog audio with high fidelity. When set to ON, the
at left).
3 • AAC files can be played back only on the PD-30.
display shows no indicators. The factory default
• The brightness of the STANDBY indicator does not
• Also see Playable file formats on page 12.
condition is OFF.
change.
4 Also see Playing DSD discs on page 12.
5 This function is enabled only during playback of files recorded on disc.
• Press the PURE AUDIO button.
6 Hybrid SACD discs only.
Press again to turn the function OFF.
• When this function is set to ON and the main unit’s
Auto power down (automatically sets
input is switched to SACD/CD, the PURE AUDIO
indicator will light on the front panel. During disc
power to standby)
playback, the front panel display turns OFF.
This function automatically switches the unit to standby
• When the PURE AUDIO indicator is lighted, any
mode if no signal or switch operation is detected for 30
iPod/iPhone/iPad connected to the main unit will
minutes.
not be recharged.
SET UP
1 Press the
SET UP
button.
2 Change the setting and confirm.
Changing the playback area (layer) of
Use the / button to set the function ON
or OFF as desired, then press the ENTER
an SACD/CD
ENTER
button to confirm.
Hybrid SACD discs are composed of two layers, an
SACD layer, and CD layer, allowing you to select which
Note
layer you wish to play.
• This function is disabled when iPod input is
selected.
Оглавление
- Before you start
- Connecting up
- Controls and displays
- Playback
- Using advanced functions
- Additional information
- Avant de commencer
- Connexions
- Commandes et écrans
- Lecture
- Les fonctions avancées
- Informations complémentaires
- Bevor Sie beginnen
- Anschließen
- Bedienelemente und Anzeigen
- Wiedergabe
- Erweiterte Funktionen
- Zusätzliche Informationen
- Prima di iniziare
- Collegamento
- Controlli e display
- Riproduzione
- Utilizzo delle funzioni avanzate
- Informazioni aggiuntive
- Voordat u begint
- Aansluitingen
- Bedieningsorganen en display-aanduidingen
- Afspelen
- Geavanceerde functies gebruiken
- Extra informatie
- Antes de comenzar
- Conexiones
- Controles y visualizadores
- Reproducción
- Utilizar funciones avanzadas
- Información adicional
- Подготовка к использованию
- Подключение
- Органы управления и индикации
- Воспроизведение
- Использование дополнительных
- Дополнительная информация