Pioneer PD-30-K: Playback

Playback04

Chapter 4:

• Repeat play will begin, and the [REPEAT] indicator

Example: To select track 15, press the 1 and 5

will light on the unit’s front panel display. Press the

buttons, then press ENTER. In the event you

button again to alternate the type of repeat play

make a mistake, press the CLEAR button.

Playback

between single-track repeat and disc (all-track)

repeat as follows:

3 Repeat step 2 to input the numbers of all

The functions that can be used differ according to the

desired tracks.

type of disc and file. In some cases, some of the

Note

functions cannot be used. See Playback functions on

• If the power cord is disconnected when the unit is

トラックリピート([REPEAT]点灯)

4 Press the



button.

page 11.

in the standby mode the unit will turn off, but when

↓

Playback will begin in the order the tracks have

the cord is then reconnected, the unit will not

ディスクリピート([REPEAT]、[ALL]点灯)

been programmed. If you wish to add other

automatically turn on. After reconnecting the

↓

tracks, repeat steps 1 and 2.

power cord, press the remote control’s

リピートオフ

Playing discs

 STANDBY/ON button to turn the power on.

Note

1 Press the front panel’s

Note

•If the CLEAR button is pressed when the disc is

Fast forward/Fast reverse

stopped, all programmed tracks will be cancelled.

/I STANDBY/ON

button to turn

• The repeat play function is canceled when disc

• To clear programmed tracks, from the stop mode,

power ON to the unit.

• During playback, press the

playback is stopped.

press the PROGRAM button followed by the CLEAR

• With the PD-30, turn on the power by



or



button.

button. The programmed tracks will be cancelled,

pressing the POWER button in until it

Each time the button is pressed the

Random playback

beginning with the last one programmed.

remains at the depressed position.

forward or reverse speed is changed in four steps.

All tracks on the disc are selected and played in random

• A “pause” cannot be programmed.

Side view of front panel

• To return to the normal play function, press the

order, until each track has been played once.

• The contents of programmed playback (all-track

 button.

2 Press the



button to

repeat) can be repeated. Just press the REPEAT

• During playback, press the

button after beginning programmed playback (see

open the disc tray and set

RANDOM

button.

Skip function

at left).

the disc in place.

Random playback starts, and the [RANDOM]

• Single-track repeat cannot be performed during

• Set the disc with the imprinted side facing up.

• During playback, press the

lights in the main unit's front panel display.

programmed playback.

3 Press the



button



or



button.

• Random playback cannot be used during

Note

programmed playback.

to begin playback.

Playback will skip ahead or backwards the

number of tracks corresponding to the times the button

• Random playback continues until the disc stops, or

•If the  button is pressed during programmed

• To pause playback, press

the  button.

is pressed.

until the RANDOM button is pressed once again.

playback, play will jump ahead to begin playback of

the next programmed track.

• To stop playback, press the  button.

• The random playback function cannot be used

Direct search (designate a specific track

simultaneously with programmed playback.

• After playback has stopped, to begin the same

•If the  button is pressed during random

programmed playback again, press the PROGRAM

Note

for playback)

playback, play skips ahead to the next randomly

button, followed by the  button.

• Steps 2 and 3 can be performed via the remote

• Using the number buttons,

selected track. If the  button is pressed,

control in the same way as for the main unit’s front

playback returns to the beginning of the currently

View disc data

input the desired track number,

panel controls.

playing track and starts again.

then press the ENTER button to confirm the

• During playback, press the

Set the power to Standby

selection.

Programmed playback (Play tracks in a

DISPLAY

button

Even if the ENTER button is not pressed,

Remove any disc loaded before setting the power switch

Various data, including elapsed and remaining playing

playback will begin automatically after a 5-

predetermined order)

to STANDBY mode.

times will be displayed.

second interval (this does not apply to

This function allows you to program up to 24 tracks for

Depending on the disc, pressing the DISPLAY button

• Press the remote control’s

programmed playback).

playback in the order selected.

multiple times will cause the display to cycle through

 STANDBY/ON

button.

1 From the stop mode, press the

different data contents.

The next time you wish to turn on the power,

Repeat playback

press the remote control’s  STANDBY/ON button.

Repeat play can be performed for the currently playing

PROGRAM

button.

Note

• In the case of the PD-30, pressing the front panel

single track, or for all tracks on the entire disc.

The [PGM] indicator will light in the unit’s front panel

display.

• Displays file name (first 8 characters) when playing

/I STANDBY/ON button sets the unit to power

• During playback, press the

AAC files (PD-30 only), WMA/MP3 files, or files on

OFF, not STANDBY mode. To turn on the power

2 Use the number buttons to select the

again, press the front panel’s /I STANDBY/ON

REPEAT button.

DSD discs. Depending on the characters used,

number of the desired track,

however, the display may not be entirely correct.

button.

followed by the

ENTER

button.

8

En

RANDOM

0 9

〜

DISPLAY

ENTER

PROGRAM

REPEAT

PD-30_PWSYXZT8.book 8 ページ ２０１２年５月７日　月曜日　午前１１時３３分

ENTER

Playback 04

English

Playing your iPod/iPhone/iPad

iPod/iPhone/iPad playback

1Press

iPod/USB

on the remote

iPod/USB

(PD-30 only)

control to select

iPod

as the input

Merely by connecting your iPod/iPhone/iPad to this unit,

you can enjoy high-quality sound from your iPod/iPhone/

source.

iPad.

Press the remote control’s iPod/USB button.

• You can also perform the same operation by

Confirm what iPod/iPhone/iPad models are

pressing the FUNCTION on the front panel

repeatedly.

supported

The iPod/iPhone/iPad playable on this unit are shown

2 Connect your iPod/iPhone/iPad.

below.

Connect your iPod/iPhone/iPad to the USB port on the

unit’s front panel. Use the iPod cable supplied with your

iPod/iPhone/iPad Audio Control

iPod/iPhone/iPad for the connection.

DeutschFrançais

iPod nano 2/3/4/5/6G 

• For the cable connection, also refer to the operating

instructions for your iPod/iPhone/iPad.

iPod touch 1/2/3/4G 

iPhone 

iPhone 3G/3GS 

iPhone 4/4S 

iPad



Italiano Español Русский

iPad 2



• This system has been developed and tested for the

software version of iPod/iPhone/iPad indicated on

the website of Pioneer.

• Installing software versions other than indicated on

Nederlands

the website of Pioneer to your iPod/iPhone/iPad

may result in incompatibility with this system.

Note

• Pioneer does not guarantee that this unit plays

iPod/iPhone/iPad models other than the ones

specified.

• Some functions may be restricted depending on

the model or software version.

• iPod/iPhone/iPad is licensed for reproduction of

non-copyrighted materials or materials the user is

legally permitted to reproduce.

• Features such as the equalizer cannot be controlled

using this system, and we recommend switching

the equalizer off before connecting.

• Pioneer cannot under any circumstances accept

responsibility for any direct or indirect loss arising

from any inconvenience or loss of recorded

material resulting from iPod/iPhone/iPad failure.

• For detailed instructions on using the iPod/iPhone/

iPad, please refer to the manual supplied with the

iPod/iPhone/iPad.

9

En

PD-30_PWSYXZT8.book 9 ページ ２０１２年５月７日　月曜日　午前１１時３３分

The following operations are possible for iPod/iPhone/

iPad.

Note

• iPod/iPhone/iPad recharging occurs whenever an

Button What it does

iPod/iPhone/iPad is connected to this unit.

(Recharging is enabled only when the unit’s power



Starts playback. During playback, pause/

unpause playback.

is turned ON.) (does not apply when pure audio

function is ON)



Pauses playback.

• When input is switched from iPod to another

function, the iPod/iPhone/iPad’s playback will be



Press to skip to the start of the current file,

then previous files.

stopped automatically.



Hold depressed for fast reverse.



Press to skip to the next file.



Hold depressed for fast forward.

RANDOM

The currently selected iPod/iPhone/iPad

files are played back in random order

(shuffle play).

REPEAT

The currently selected iPod/iPhone/iPad

files are played back repeatedly.

1

iPod MENU

Use when operating the iPod/iPhone/iPad

menu.

/

/

ENTER

Use to perform iPod/iPhone/iPad menu

operations.

1Each time you press REPEAT the repeat modes

changes as below.

Repeat 1  Repeat all  Normal playback

Repeat 1: Repeats a file currently played back.

Repeat all: Repeats all files.

Important

If this unit cannot play your iPod/iPhone/iPad, perform

the following troubleshooting checks:

• Check whether the iPod/iPhone/iPad is supported

by this unit.

• Reconnect the iPod/iPhone/iPad to the unit. If this

doesn’t seem to work, try resetting your iPod/

iPhone/iPad.

• Check the iPod/iPhone/iPad software is supported

by this unit.

If the iPod/iPhone/iPad cannot be operated, check the

following items:

• Is the iPod/iPhone/iPad connected correctly?

Reconnect the iPod/iPhone/iPad to the unit.

• Is the iPod/iPhone/iPad experiencing a hangup? Try

resetting the iPod/iPhone/iPad, and reconnect it to

the unit.