AEG sr 4357 bt: English

English

39

Press three times = all music titles are repeated continu-

Please note:

ously (the symbol “ “ is lit in the

There are a number of different recording and compression

display).

methods, as well as quality differences between CDs and self-

recorded CDs.

Press four times = all the functions are deactivated.

Playback is continued normally.

Furthermore, the music industry does not adhere to xed

standards (copy protection).

• Keep the button pressed while playing back an MP3 le.

The current folder will appear in the display (e.g. F01).

For these reasons it is possible that in rare cases there are

Use the SKIP-/SKIP+ buttons to select another folder. The

problems with the playback of CDs and MP3 CDs. This is not

music in the selected folder is played back.

a malfunction of the device.

Programmed Play

AUX IN socket

This can be used to program any desired sequence of tracks.

To connect analogue replay devices. Via this socket you can

also hear the sound of other playback devices such as MP3

1. Press the STOP/M+ button (12).

players, CD players etc. through the loudspeakers.

2. Press the MODE/MEM/FOLDER button (9). “P01”

(Storage space) and the notification “P” will appear in

1. Please connect the external device with a 3.5 mm stereo

the display. Use the SKIP+/SKIP- buttons (6) to select the

jack plug to the AUX-IN socket.

desired track and then press the MODE/MEM/FOLDER

2. Repeatedly press the POWER/SOURCE button (11), until

button again. The display changes to memory slot P02.

“AUX” is shown in the display.

3. Select the next track with the SKIP+/SKIP- buttons and

3. You will hear the sound playback from the external device

press the MODE/MEM/FOLDER button again. Repeat

through the loudspeakers. You may adjust the volume

the procedure until all the desired tracks are selected.

with VOL-/VOL+ (6). The CD buttons are not functional.

4. For the remaining procedure please see the operating

NOTE:

instructions of the external sound source.

Once the storage capacity of the tracks to be pro-

grammed has been reached “FUL” flashes in the

NOTE:

display.

Adjust the volume of the external device to a comfortable

level.

4. Press the PLAY/PAUSE button (10). The playback starts.

The notification “P” will appear additionally in the display.

5. Press once the STOP/M+ button to stop the playback

Cleaning and Maintenance

while retaining the program.

6. To play the programme back again, press the PLAY/

WARNING:

PAUSE button.

Do not immerse the device in water.

7. To delete the program, press the STOP/M+ button twice.

The notification “P” will disappear.

• Always remove the mains plug before cleaning the

machine.

The device stops automatically after all programmed titles

• Any marks on the surface can be wiped off with a slightly

have been played. The programmed sequence remains in

damp cloth without any additives.

the memory.

Troubleshooting

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in

Symptoms Course Solution

MP3 format. The device also supports all standard CD types:

CD can not be

CD is not inserted

Ensure that the disc is

CD, CD-RW, CD-R.

played back.

or inserted incor-

inserted with the label

rectly.

facing upwards.

This machine of is able to play MP3 CDs. Up to 200 tracks

Batteries too weak. Insert new batteries

can be compressed and stored on these CDs. Your machine

or operate the device

detects an MP3 CD automatically (the total number of tracks

with the mains lead.

and MP3s appears in the display). If you would like to play

one of these CDs, proceed as described under “Playing

CD jumps dur-

Check the disc for

Check the disc for

CDs/MP3”. Tracks can be programmed as described under

ing playback.

fingerprints, dirt or

fingerprints, dirt or

“Playing Back Programmed Tracks”.

scratches.

scratches.