AEG sr 4357 bt: English

English

37

4. Press the MODE/MEM/FOLDER button. The radio

This device offers you the possibility to use a Bluetooth-

station will be stored.

enabled device. The functional radius is limited to approx.

4. For FM stations, you can use the PLAY/PAUSE button

15 metres depending on the surroundings and the unit used.

(10) to switch between mono and stereo reception. We

If your playing device supports the A2DP profile (Advanced

recommend that you switch to mono in case of bad

Audio Distribution Profile) and has a music-player function,

reception. The message “ “ is shown on the display for

then you can also wirelessly transfer music to the device. The

stereo reception.

A2DP profile involves a multi-vendor Bluetooth profile. By

streaming, stereo-audio signals are wirelessly transferred be-

Select the preset radio station

tween the playing device (source) and the receiving device.

The preset radio stations can be selected by repeatedly

To be able to remotely control the source, the playback de-

pressing the STOP/M+ button (12).

vice must support the AVRCP profile (Audio Video Remote

Control Profile).

Playing CDs/MP3

Due to the different device manufacturers, models, and

1. Select the CD mode with the POWER/SOURCE button

software versions, a full functionality cannot be guaranteed.

(11). The following will appear in the display “- - -”.

2. Open the CD compartment (3) by pulling the lid upwards

Logging on devices (Pairing)

by the tab (4).

Before you listen to music via the unit, you must pair the

3. Insert an audio CD with the printed side facing upwards

devices.

on to the central cone so that the CD clicks into place

1. Ensure, that the Bluetooth function is activated in your

and then close the lid of the CD compartment.

player (e.g. mobile phone). For this, refer to the operation

4. After a few seconds the total number of songs/tracks is

manual of your player.

shown in the display.

2. Press the POWER/SOURCE button (11) repeatedly, until

NOTE:

“bt” is shown on the display. The symbol ”

“ will blink

In the case of CDs in MP3 format the number of folders

in the display. This signalizes that the device is in pairing

is briefly displayed at first.

mode.

3. Chose the Bluetooth menu in your player and register

5. The CD will play from the first title. The elapsed play time

the device in your player. For this, refer to the operation

and the message “CD

“ respectively “MP3 “ are

manual of your player. The device “AEG SR 4357 BT” will

shown in the display.

show in your player as a selection.

6. In order to remove a CD, please press the STOP/MEM

button (12), open the CD compartment and lift the CD

NOTE:

out carefully.

Only one playback device can be connected with the

Always keep the CD deck closed.

device at one time. If the device is already connected

with another playback device, the device will not ap-

NOTE:

pear in the BT selection menu.

• If a disc is inserted the wrong way around, respectively

if no disc is inserted, then the message “- - -” will blink

4. Now enter the password “0000” in your player, depend-

and “NO” appears on the display.

ing on the device manufacturers, model, and software

• Playback of CDs produced by the user cannot be

version.

guaranteed due to the large variety of software and CD

If the registration was performed successfully, the symbol

media available.

“ “ will light up in the display. For the further procedure,

please refer to the user manual of the playback unit. If pos-

sible, adjust the volume of the external unit to a comfortable

Playing back music via Bluetooth

level.

Bluetooth involves a technology for wireless radio connec-

NOTE:

tion of devices over a short distance. Devices with Bluetooth

• Depending on the device manufacturer, you need to

standard are transmitting between 2.402 and 2.480 GHz in

perform the registration (PAIRING) again to connect the

the ISM band (Industrial, Scientific and Medical). Interference

devices.

can be caused for example by WLAN-networks, DAB radios,

• In case of problems with the registration of a replay

cordless phones, or microwave ovens which work on the

device, deactivate the WiFi-/ and mobile data function

same frequency band.

in your playback device.

• The Bluetooth compatibility cannot be ensured for

devices (e.g. mobile phones) getting released in the

future.