AEG mr 4139 bt: English

English

31

1. PressandholdtheSETbuttonforapprox.3seconds.The

First Use of the Device/Introduction

hourindicatorstartstoash.

• Selectaproperplaceforthedevice.Adry,levelandslip

2. Use UP/DOWN buttons to set the hours. Confirm with

proof surface is suitable.

SET.

• Makesurethedeviceisventedsufciently!

3. Use UP/ DOWN buttons to set the minutes.

• Removetheprotectivelmfromthedevice,ifpresent.

4. Use the UP/DOWN buttons to select the 24- or 12-hour

time format. Confirm with SET.

Stromversorgung

NOTE: When choosing the 12-hour time format, the

• Insertthegridplugintoaproperlyinstalledsocket.Con-

display shows

nect the device with the plug connector by inserting its

AM = morning, PM = afternoon.

plug into the DC 6 V jack of the device.

• Makesurethegridvoltagecorrespondstothegureson

5. Press SET again in order to save the time settings.

the rating plate.

NOTE:

CAUTION:

In case of power interruptions the clock time will be lost.

• TheincludedACadaptermayonlybeusedwiththis

device. Do not use it for other devices.

Light button

• UseonlyanACadapterwith6V(

). A different

Press down the LIGHT button (14) to continuously light the

AC adapter may damage the unit.

display. When pressing LIGHT again, the display backlight

will turn off time-delayed.

NOTE:

• Disconnectfrommainspowersupplyduringlonger

Switch (13)

periods of non-use.

Use this switch to select the following functions:

• Thetimeandthestoredradiostationsarelostassoon

- AUX IN •

BLUETOOTH

as the power supply has been interrupted.

The device supports AUX and Bluetooth operation.

Please refer to “Playing back music files” below.

Inserting batteries (batteries not included)

- BUZZ

Alternatively, you may operate the device with batteries.

Listen to radio or set an alarm time. If an alarm has been

1. Open the battery compartment located at the back of

activated, the device will wake you with a signal sound.

the device.

- RADIO

2. Insert 4 batteries of type R6/AA 1.5 V, thereby observing

Listen to radio or set an alarm time. If an alarm has been

the correct polarity (see bottom of the battery compart-

activated, you will wake up to radio operation. The device

ment).

will switch on the radio station listened to last with the

3. Close the battery compartment.

volume set at the volume control.

WARNING:

Donotexposebatteriestoextremeheatsuchassunlight,

Alarm function

fire or the like. There is a risk of explosion!

You may only set the alarm time when the clock time is

displayed. If necessary, switch off the device with the RADIO

CAUTION:

button.

• Batteriescanleakbatteryacid.Ifyoudonotusethe

device for a prolonged period of time, remove the bat-

Set the alarm time

teries from the device.

• Followtheinstructionsbythebatteries’manufacturer!

1. Press the MODE button. The display will show ALM/SET

• Differentbatterytypesornewandusedbatteriesmust

and the currently set alarm time.

not be used together.

2. PressandholdtheSETbuttonforapprox.3seconds.The

• Donotdisposeofbatteriesthroughnormalhousehold

hourindicatorstartsashing.

waste. Return batteries to appropriate collection facili-

3. Use UP or DOWN to set the hours. Confirm with SET.

ties or retailers.

4. Use UP or DOWN to set the minutes. Confirm with SET.

5. Use UP or DOWN to activate or deactivate the alarm

function. Alarm function activated: an alarm icon will be

Setting the clock (during standby mode)

displayed.

You may only set the clock when the clock time is displayed. If

6. Press SET to save your settings.

necessary, switch off the device with the RADIO button.

7. At the end, press MODE to return to clock time mode.

8. Use the switch (13) to select your desired wake-up mode.

BUZZ = signal sound, RADIO = radio station listened to

last.