AEG fu 4002p: English

55

English

NOTE:

• Youcanmaketheunitsearchagainforastationsignalatanytime.Todoso,press

the RCC button (6), the “ ”symbolstartstoashagain.Youcanalsodeactivatethe

automatic search with the RCC button. To do so, keep the RCC button pressed until

the “ ” symbol is no longer displayed.

• Thesignalcanbereceivedwithoutproblemswithinaradiusofca.2000kmaround

Frankfurt / Main, but interference may occur, depending on local conditions. This

may occur especially in buildings containing a high percentage of metal, as well as in

proximitytoTVsets,PCs,mobilephonesetc.whichareswitchedon!Ifthereception

cannot be automatically adjusted after 10 minutes in spite of the alignment of the

integrated antenna, the reception in the respective location is too weak. In this case,

set the time manually or change location.

Manual

The time cannot be set manually whilst the unit is searching for a radio signal.

• HoldtheMODEbutton(9)presseduntiltheyearindication(YR)onthedisplayashes.

• UsingtheUP(8)undDOWN(7)buttons,youcannowsettheyear(YR),month(MONTH),

day (DATE), the language for the weekday (DAY), time zone (ZONE), hours and min-

utes in turn. For the weekday language you can choose from the following languages:

GE = German, EN = English, IT = Italian, FR = French, NE = Dutch, SP = Spanish,

DE = Danish.

• Ineachcase,conrmtheinputwiththeMODEbutton.Thecurrentindicationtobeset

ashesonthedisplay.

NOTE:

• Theinputisstoredautomaticallywithinapproximately30secondswhennobuttonis

pressed.

• Settingoftheweekdayisdoneautomatically.

Change time display format

Press the UP button (8) to switch between 12 hour and 24 hour display.

NOTE:

If 12 hour is selected, the following will appear: AM = morning, PM = afternoon

56

English

Alarm function

NOTE: Important!

The alarm time cannot be set, activated or deactivated whilst the unit is searching for a

radio signal.

Setting of the Alarm

You can set two alarm times. Proceed as follows:

1. PresstheALMSETbutton(3)forapproximately3seconds.Thedisplayshows“AL1”

andthenumberoftheactuallysetalarmtimestartstoash.

2. Use the buttons UP (8) and DOWN (7) for setting.

3. PresstheALMSETbuttonforconrmation.Theminutesstarttoash.

4. Use the buttons UP and DOWN for setting.

5. Press the ALM SET button to set the second alarm time. Proceed as described above

for the setting.

NOTE:

• Ifyouwanttosetonlytherstalarmtime,presstheALMSETbuttonuntilthe

time is displayed again.

• PresstheALMSETbuttontodisplaythesetalarmtimesforashorttime.

Activate alarm times

You can activate the first or second alarm or both together.

1. Whenthetimeisdisplayed,brieypresstheALMSETbutton(3).Themessage“AL1”

appears on the display in place of the seconds display.

2. Press the UP button (8) to activate the first alarm time. The “

” symbol appears on the

display.

3. Press the ALM SET button again. The message “AL2” appears on the display.

4. Press the UP button to also activate the second alarm time. The “ ” symbol appears

on the display.

5. Press the ALM SET button again to return to the time display.

A beep will sound when the set alarm time is reached. The intensity of the beep increases

slowly.

NOTE:

If the alarm is not interrupted, the beep switches off by itself after two minutes.