AEG fu 4002p: English

57

English

Turning off the Alarm

Press the ALM SET button (3) to stop the alarm.

Automatic Alarm Interval

Theautomaticallysetalarmfunctioncanbeshutoffforapproximately5minuteswiththe

SNZ

LIGHTbutton(1).SNZ1orSNZ2ashesonthedisplay.

Deactivate the Alarm Function

1. Press the ALM SET button (3) once. AL1 appears on the display.

2. Then press the UP button to deactivate the first alarm time. The “

” symbol goes out

on the display.

3. Press the ALM SET button again. AL2 appears on the display.

4. Press the UP button to deactivate the second alarm time. The “ ” symbol goes out on

the display.

5. Press the ALM SET button to return to the time display.

Projection

NOTE: Important!

• Thedisplaycanonlybeseeninadarkenedroom.

• Theoptimumdistancefortheprojectionis3-5meters.

With this unit, you can project the time onto a wall or the ceiling.

• PresstheSNZ

LIGHTbutton(1)toswitchonthefunctionforapprox.5seconds.

• Projector(10)projectsthecurrenttemperatureandprojector(5)thetime.

• Topreventtheprojectionsfromoverlapping,rotatetheprojectorsinthedesireddirec-

tion.

Cleaning

CAUTION:

Do not dip the appliance in water.

• Removetheplugbeforecleaning.

• Cleantheappliancewithaslightlyhumidclothwithoutanyadditives.