AEG ST 700 E: 24 25 ENGLISHENGLISH

TECHNICAL DATA

ST 700 E ST 800 XE

MAINS CONNECTION

Rated input ..............................................................................

.........................705 W ...........................705 W

Connect only to single-phase a.c. current and only to the

Output ......................................................................................

.........................385 W ...........................385 W

system voltage indicated on the rating plate. It is also

-1

-1

Stroke rate under no–load .......................................................

................... 600-2700 min

................. 600-2700 min

possible to connect to sockets without an earthing contact

Lengths of stroke .....................................................................

...........................26 mm ..........................26 mm

as the design conforms to safety class II.

Bevel cuts up to .......................................................................

......................... 45° .............................. 45°

Under the effect of extreme electromagnetic interferences

Cutting depth max. in:

from the outside, temporary variations in the speed of

Wood ....................................................................................

......................... 110 mm ........................110 mm

rotation could arise in particular cases.

Steel .....................................................................................

...........................10 mm ..........................10 mm

Aluminium ............................................................................

...........................25 mm ..........................25 mm

MAINTENANCE

Weight without cable ...............................................................

..........................2,2 kg ............................2,3 kg

The ventilation slots of the machine must be kept clear at all

times.

Noise/vibration information

Measured values determined according to EN 60 745.

Use only AEG accessories and spare parts. Should

Typically, the A-weighted noise levels of the tool are:

components need to be exchanged which have not been

Sound pressure level (K = 3 dB(A)) .......................................

...........................87 dB (A) ......................87 dB (A)

described, please contact one of our AEG service agents

Sound power level (K = 3 dB(A)) ............................................

...........................98 dB (A) ......................98 dB (A)

(see our list of guarantee/service addresses).

Wear ear protectors!

If needed, an exploded view of the tool can be ordered.

Total vibration values (vector sum in the three axes)

Please state the ten-digit No. as well as the machine type

determined according to EN 60745.

printed on the label and order the drawing at your local

Sawing of wood

service agents or directly at: AEG Elektrowerkzeuge,

2

2

Vibration emission value a

...................................................

........................ 11,5 m/s

.......................11,5 m/s

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

h

2

2

Uncertainty K ........................................................................

..........................1,5 m/s

.........................1,5 m/s

Sawing of sheet metal

SYMBOLS

2

2

Vibration emission value a

...................................................

........................... 11 m/s

..........................11 m/s

h

2

2

Uncertainty K ........................................................................

..........................1,5 m/s

.........................1,5 m/s

Please read the instructions carefully before

WARNING

starting the machine.

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

Always disconnect the plug from the socket

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

before carrying out any work on the

the exposure level over the total working period.

machine.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Accessory - Not included in standard

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

equipment, available as an accessory.

accessories, keep the hands warm, organisation of work patterns.

Do not dispose of electric tools together

with household waste material! In

Plunge cuts without pre–drilling a hole are possible with soft

observance of European Directive 2002/96/

WARNING! Read all safety warnings and all

materials (wood, light building materials for walls). Harder

EC on waste electrical and electronic

instructions, including those given in the accompanying

materials (metals) must rst be drilled with a hole

equipment and its implementation in

brochure. Failure to follow the warnings and instructions

corresponding to the size of the saw blade.

accordance with national law, electric tools

may result in electric shock, re and/or serious injury.

that have reached the end of their life must

Save all warnings and instructions for future reference.

The dust produced when using this tool may be harmful to

be collected separately and returned to an

health. Do not inhale the dust. Wear a suitable dust

environmentally compatible recycling

SAFETY INSTRUCTIONS

protection mask.

facility.

Wear ear protectors. Exposure to noise can cause hearing

SPECIFIED CONDITIONS OF USE

loss.

This jig saw can cut wood, plastic and metal; it can cut

Hold power tool by insulated gripping surfaces, when

straight lines, bevels, curves, and internal cut–outs.

performing an operation where the cutting accessory

Do not use this product in any other way as stated for

may contact hidden wiring or its own cord. Contact with

normal use.

a „live“ wire will also make exposed metal parts of the power

tool „live“ and shock the operator.

EC-DECLARATION OF CONFORMITY

Appliances used at many different locations including open

We declare under our sole responsibility that this product is

air must be connected via a current surge preventing switch.

in conformity with the following standards or standardized

Always wear goggles when using the machine. It is

documents. EN 60745, EN 55014–1, EN 55014–2,

recommended to wear gloves, sturdy non slipping shoes

EN 61000–3–2, EN 61000–3–3, in accordance with the

and apron.

regulations 98/37/EC, 2004/108/EG

Sawdust and splinters must not be removed while the

machine is running.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Winnenden, 2009-01-04

Rainer Kumpf

Manager Product Development

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

Always use the protective shields on the machine.

Do not use cracked or distorted saw blades.

24 25

ENGLISHENGLISH