AEG SRC 4321: English

52

English

Power supply

Location of Controls

• Insert the grid plug into a properly installed

three prong socket with 230V, 50Hz. Connect

1 iPod connection

the device with the plug connector by inserting

2 TUNING+/TUNING- buttons

its plug into the DC 15V jack (16) of the

3 SET AL1 button (set alarm)

device.

4 AL2 (2nd alarm time) button

• Make sure the grid voltage corresponds to the

5 SET AL2 button (set 2nd alarm time)

fi gures on the rating plate.

6 MIN button (minutes)

7 HR button (hours)

Attention:

8 Alarm Interval/button for delayed switch-off

• The plug connector included must only be

(SNOOZE/SLEEP)

used with this device. Don’t use for other

9 TIME SET button

devices.

10 BBS button

• Only use a power adapter with 15V

11 FUNCTION Operation selection button

( ), a different adapter may damage

12 AL1 (alarm 1) button

the device.

13 STANDBY button

14 VOL+/VOL- volume control buttons

Note:

If the device is not used for an extended

Back Side

period of time, the power adapter must be

15 DIMMER L/H switch

removed from the socket.

16 DC 15V connection

17 LINE IN jack

Inserting the batteries

18 PHONE jack

(Batteries are not included with the device)

19 DST 0/+1 switch (winter/summer time)

In case of a power cut or if the device is un-

Remote Control

plugged, with batteries inserted, the settings

20 FUNCTION operation selection button

will be kept.

21 / buttons (search fwd/bwd)

22 (Play/Pause) button

1. Open the battery case on the bottom of the

23 BBS button

device.

24 VOL+/VOL- volume control buttons

2. Insert 2 R03 “AAA” batteries 1.5V. Mind the

25 MUTE button

correct polarity (indicated on the bottom of

26 Delayed switch-off button (SLEEP)

the battery case).

27 POWER button

3. Close the battery case.

28 12/24 button (clock time mode)

4. If the device is not used for an extended

period of time, remove the batteries from the

First Use of the Device/ Introduc-

device to avoid any leaking of battery acid.

tion

Note:

• Before the fi rst use of the device, read the

If battery power is low or without batteries

user manual carefully.

inserted, the symbol “ ” appears on the

• Select a proper place for the device such as

display.

a dry, and even non slip area where you can

easily operate the device.

• Make sure the device is vented suffi ciently.

• If still in place, remove the protection foil from

the display.

SRC 4321 CD IM all languages 09252 52SRC 4321 CD IM all languages 09252 52 2008-9-30 18:18:542008-9-30 18:18:54