AEG PM3 4935412541: 12 13 ENGLISH ENGLISH

 

PM 3

MAINS CONNECTION

Production code.......................................................................

.......................4125 42 01

Connect only to single-phase a.c. current and only to the

..............................................................................................

.......................4323 57 01

system voltage indicated on the rating plate. It is also

...000001-999999

possible to connect to sockets without an earthing contact

Rated input ..............................................................................

.........................720 W

as the design conforms to safety class II.

Output ......................................................................................

.........................360 W

-1

No-load speed .........................................................................

.......................3650 min

MAINTENANCE

Impact energy per stroke according to EPTA-Procedure 05/2009

..........................3,6 J

The ventilation slots of the machine must be kept clear at all

Impact energy per stroke (pre 2009) .......................................

..........................4,1 J

times.

Weight according EPTA-Procedure 01/2003 ...........................

..........................3,7 kg

Important note! If the carbon brushes are worn, in addition



to exchanging the brushes the tool should be sent to

Measured values determined according to EN 60745.

after-sales service. This will ensure long service life and top

performance.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) .......................................

...........................87 dB (A)

Use only AEG accessories and spare parts. Should

Sound power level (K = 3 dB(A)) ............................................

...........................98 dB (A)

components need to be replaced which have not been

Wear ear protectors!

described, please contact one of our AEG service agents

(see our list of guarantee/service addresses).



Total vibration values (vector sum in the three axes)

If needed, an exploded view of the tool can be ordered.

determined according to EN 60745.

Please state the machine type printed as well as the six-digit

Vibration emission value a

:

No. on the label and order the drawing at your local service

h

2

Chiselling: vibration emission value a

....................................

...........................10 m/s

agents or directly at: Techtronic Industries GmbH,

h

2

Uncertainty K = .......................................................................

..........................1,5 m/s

Max-Eyth-Straße 10, 71364 Winnenden, Germany.

WARNING

SYMBOLS

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

Please read the instructions carefully before

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

starting the machine.



the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or



Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

Always disconnect the plug from the socket

accessories, keep the hands warm, organisation of work patterns.

before carrying out any work on the

machine.



Under the effect of extreme electromagnetic interferences

instructions. Failure to follow the warnings and instructions

from the outside, temporary variations in the speed of



rotation could arise in particular cases.



SPECIFIED CONDITIONS OF USE

Accessory - Not included in standard

SAFETY INSTRUCTIONS

The hammer can be used for chiselling in stone and

equipment, available as an accessory.

Wear ear protectors. Exposure to noise can cause hearing

concrete.

loss.

Do not use this product in any other way as stated for

 Loss of

normal use.

control can cause personal injury.

EC-DECLARATION OF CONFORMITY

Do not dispose of electric tools together



with household waste material! In



We declare under our sole responsibility that the product

observance of European Directive 2002/96/

 Cutting



EC on waste electrical and electronic

accessory contacting a „live“ wire may make exposed metal

regulations and the directives 2011/65/EU (RoHs),

equipment and its implementation in

parts of the power tool „live“ and could give the operator an

2006/42/EC, 2004/108/EC and the following harmonized

accordance with national law, electric tools

electric shock.

standards have been used:

that have reached the end of their life must

Appliances used at many different locations including open

EN 60745-1:2009 + A11:2010

be collected separately and returned to an

air should be connected via a residual current device of

EN 60745-2-6:2010

environmentally compatible recycling

30 mA or less.

EN 55014-1:2006 + A1:2009 + A2:2011

facility.

EN 55014-2:1997 + A1:2001 + A2:2008

Always wear goggles when using the machine. It is

EN 61000-3-2:2006 + A1:2009 + A2:2009

recommended to wear gloves, sturdy non slipping shoes

EN 61000-3-3:2008

Class II construction, tool in which

and apron.

protection against electric shock does not

Sawdust and splinters must not be removed while the

rely on basic insulation only, but in which

Winnenden, 2013-01-28

machine is running.

additional safety precautions, such as

double insulation or reinforced insulation,

Always disconnect the plug from the socket before carrying

are provided.

out any work on the machine.

Only plug-in when machine is switched off.

Alexander Krug

Keep mains lead clear from working range of the machine.

Managing Director

Always lead the cable away behind you.





Techtronic Industries GmbH

electric cables and gas or waterpipes.

Max-Eyth-Straße 10

The dust produced when using this tool may be harmful to

71364 Winnenden

health. Do not inhale the dust. Wear a suitable dust

Germany

protection mask.

12 13

ENGLISH

ENGLISH