AEG BHT 5615: English

26

English

• Pushanattachmentontothedevice.Youmusthearit

Charging the Unit

click into place.

In order to use the stand as a charging station, connect the

• Inordertoreleasetheattachmentfromthedevice,press

mains adapter to the station as follows:

the buttons on the side of the device (3) and pull the at-

tachment off.

1. Open the locking device on the underside of the station.

• Pushacombattachmentontothemountedattachment.

2. From the underside, insert the mains adapter plug

It must click into place at the side.

through the opening on the station.

• Inordertoremoveacombattachmentfromthetrimmer,

3. Lock the plug into position by closing the locking device.

push the small catch on the back of the comb upwards

4. Insert the mains adapter cable through the cable open-

with your thumb.

ing at the back of the station.

5. Place the station in a dry room.

Practical tips for optimum trimmer results

If you do not connect the mains adapter plug to the station,

• Thehairmustbedry.

you can alternatively charge the device horizontally.

• Beforeusingthedevice,donotuseanyskincareprod-

WARNING Risk of electric shock!

ucts.

Do not charge the device in a bathroom or in the vicinity of

• Combthehairinthedirectionthatitgrows.

water!

• Iftoomuchhairremainsinthecombattachmentwhen

trimming, switch the device off. If necessary, remove the

6. Turn the unit off.

comb attachment. Brush off the hair with the cleaning

7. Place the device into the station once you have con-

brush provided.

nected the mains adapter plug to it. Alternatively, insert

the mains adapter plug directly into the socket on the

Cutting hair

bottom end of the device.

1. SAttach the hair trimmer (8) to the device.

8. Plug the power adaptor into a wall outlet.

2. Select a comb attachment (9 or 10). Press it onto the hair

NOTE:

trimmer.

• Thechargeindicatorturnsonduringcharging.

3. In order to adjust the desired cutting length, press and

• Thechargeindicatordoesnot indicate the state of

slide the button on the comb attachment at the same

charge of the rechargeable battery.

time. The length is shown on the right hand side next to

9. Charge the unit before first use for 13 hours.

the button.

Later charges take 13 hours as well.

4. Switch the device on.

5. Begin with the longest cutting setting and cut your hair in

CAUTION:

stages to the desired length.

After 13 hours always disconnect from mains power supply.

NOTE:

Note Lifetime Rechargeable Battery

The cutting lengths can vary, depending on the cutting

You can extent the lifetime of the rechargeable battery by

technique.

following these steps:

6. Switch the device off before you remove the comb at-

• Onlychargeafterthebatteryisnearlyexhausted.

tachment from the trimmer.

• Donotchargeformorethan13hours.

• Chargetheunitattemperaturesbetween0°and

Clip and Cut Beard

+ 40°C.

1. Attach the beard trimmer (7) to the device.

2. Select a comb attachment (9 or 10). Push it onto the

Usage

beard trimmer.

3. In order to adjust the desired cutting length, press and

Switching on and off

slide the button on the comb attachment at the same

Press the ON / OFF button in order to switch the device on

time. The length is shown on the right hand side next to

and/or off.

the button.

4. Switch the device on.

Putting on and taking off the attachments

5. Start with the longest cutting stage and clip goatee,

sideburns or full beard step by step to the desired length.

WARNING:

NOTE:

Always switch the device off before you fit attachments or

accessories!

The cutting lengths can vary, depending on the cutting

technique.