AEG KRC 4344: English

English

33

Setting the Alarm Time

Timer Function

You can set up to two alarms. As follows:

You can use this function to e.g. have an overview of a spe-

ciccookingtime.Themaximumtimethatcanbesetis

1. Press the ALARM button (10), - - : - - ALM1 appears on

99 minutes, 59 seconds. The previously set time is stored.

the display. If you push the ALARM button once more,

- - : - - ALM2 will appear in the display.

• YoucanadjustthesettingswiththeTUNE+/TUNE-con-

2. After you have decided on an alarm time, select the

trol (11).

alarm signal with the TUNE+/TUNE- control.

• AlwaysconrmyoursettingswiththeSETbutton(5).

• Withregardtothealarm,youcanchoosebetween

1. Switch off the appliance with the POWER button (3).

buzzer (

) and radio ( ).

2. PresstheFUNbutton(2)1x.Thepreviouslysettimeand

= Upon reaching the alarm time, a buzzer will

TMR will appear in the display.

sound.

3. Press the SET button (5). You can now adjust the setting

= When the alarm time has been reached,

for the seconds and the minutes in turn.

the selected radio station will play at its

4. Turn the TUNE control in the direction TUNE+, to activate

previously set volume.

the function.

5. As soon as the display has run to zero, a buzzer will sound.

3. Press the SET button (5). The minute display will start to

Press any key to turn off the buzzer.

ash.

4. Perform the adjustment with the TUNE+/TUNE- control

NOTE:

(11). Confirm the entry with the SET button. The hour

To stop the function early, turn the control in the direction

displaywillstarttoash.

TUNE+ once more.

5. Set the hours with the TUNE+/TUNE- control and con-

firm with the SET button.

Stopwatch function

5a. If you have selected the radio as the alarm signal, choose

the desired radio station location with the TUNE+/TUNE-

1. Switch off the appliance with the POWER button (3).

control. Then, press the SET button.

2. PressFUNbutton(2)2x.Thedisplay0:00:00andSTWwill

appear in the display.

Snooze function

3. Turn the TUNE control (11) in the TUNE+, direction to

activate the function.

The automatic alarm can be switched off using the SNZ/SLP

4. If you turn the TUNE control in the TUNE+ direction once

button(7)forapprox.5minutes.Thesymbol“

”willash

again, you can stop the function and restart it.

on the display.

5. Resetting the stopwatch: While the time is stopped,

turn the TUNE control in the TUNE- direction. 0:00:00 will

Switch off the buzzer

appear in the display once more.

In order to switch off the alarm until the following day please

press the POWER button.

AUX IN socket

Disabling the alarm

To connect analogue replay devices. Via this socket you can

1. Press the ALARM button (10) until the alarm time that you

also hear the sound of other playback devices such as MP3

want to deactivate is shown.

players, CD players etc. through the loudspeakers.

2. Select the display - - : - - with the TUNE+/TUNE- control

1. Pleaseconnecttheexternaldevicewitha3.5mmstereo

(11). The alarm time has been deactivated.

jack plug to the AUX-IN socket (12).

2. Turn on the device with the POWER button (3). Press the

Delayed Shut-Off

FUNC button (2) repeatedly until “AUd” is shown.

3. Through the loudspeakers you can hear the playback of

You can use the function for delayed power-off with radio

thesoundfromtheexternaldevice;withtheVOLUME

operation. The unit is switched off automatically when the

control (1) you can change the volume.

selected time is reached.

4. For the remaining procedure please see the operating

• Selectthetimeafterwhichtheunitisswitchedoffbyre-

instructionsoftheexternalsoundsource.

peatedly pressing the SNZ/SLP button (7). The following

selections can be made: 120 to 10 minutes. The display

NOTE:

SLEEP will appear behind the time.

• Adjustthevolumeoftheexternaldevicetoacomfort-

• ThisfunctioncanbecancelledwiththePOWERbutton(3).

able level.

• Afterca.10minuteswithoutsignal,thedevicewill

automatically switch to standby.