AEG KRC 4344: English

32

English

Switching the Device on/off (3)

Volume adjusting

Switch the device to the standby mode with the POWER

The desired volume can be sent using the VOLUME regula-

button (the date display will appear). If this button is pressed

tor (1).

once more, the device switches on again.

Display brightness

NOTE:

The backlight of the display will automatically turn off be-

After about 10 minutes, the device will automatically switch

tween 11 pm and 5 am.

to standby.

Listening to the radio

TUNE+/TUNE- control (11)

The TUNE control is used for different settings.

NOTE:

NOTE:

The preset stations will be lost if the power is interrupted.

The TUNE control is a push switch. Turn the push switch

until a “click” can be heard. Hold it down in the respec-

Scanning stations

tive direction of rotation until the desired setting has been

• TuneintothedesiredstationwiththeTUNE+/TUNE-con-

made.

trol (11). If you keep the control pressed in one direction,

thenthedevicewillsearchtothenext,orpreviousradio

Setting of the Clock (in Standby Mode)

station. The display will show the respective frequency.

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

• Ifthereisinterferenceonthereceivedstation,tryto

(11).

improve the reception by rotating, winding or unwinding

• AlwaysconrmyoursettingswiththeSETbutton(5).

the wire antenna.

1. Press the SET button (5). You can now adjust the settings

Presetting radio stations

for the minutes, hours and the display format (24 Hr or

12 Hr) in turn.

The device can preset up to 30 radio stations. To preset a

station, follow the steps below:

NOTE:

1. Search for a station as described in “Scanning stations”.

“PM” will show for afternoons in the 12 hour display.

2. Press the SET button (5). The display will show MEMORY

andtherespectivepresetlocationwillbegintoash.

Setting the date (in standby mode)

3. Use the MEM UP (9) and MEM DN (8) buttons to choose

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

the preset location for the corresponding station.

(11).

4. Press the SET button again. The station will be preset.

• AlwaysconrmyoursettingswiththeSETbutton(5).

The MEMORY indicator and the preset location will

disappear.

1. Select the date display by pushing the MODE button (4).

The year display shows in the year indicator (YEAR).

Recalling preset radio stations

2. Press the SET button (5). You can now consecutively ad-

1. Choose the preset location with the MEM UP (9) and

just the settings for the date (DATE), the month (MONTH),

MEM DN (8) buttons.

and the year (YEAR). The setting for the weekdays

changes automatically.

Automatic station scan

MO = Monday, TU = Tuesday, WD = Wednesday,

WhenholdingdowntheSETbutton(5)forapprox.3seconds,

TH = Thursday, FR = Friday,

the device will start the automatic station scan searching the

SA = Saturday, SU = Sunday

entire frequency range automatically for stations. The stations

found will be stored on the preset locations 1-30 in ascending

Changing the display indicator

order.

With the MODE button (4), you can toggle between the date

NOTE:

and the time indicator or between the date and the year.

• Thescanwillonlystopafterall30presetlocationshave

Headphone jack (13)

been filled.

• Theordercannotbechangedonceset.

For headphone operation, use a headphone set with a

3.5 mm stereo jack plug plugged into the

headphone jack.

The speakers are switched off.