AEG FS 140 416090: English

TECHNICAL DATA Oscillating sander

SPECIFIED CONDITIONS OF USE

Rated input .................................................

................... 260

W

The oscillating sander can be used for sanding wood, plastics and

-1

No-load speed ............................................

..................

14000

min

metal.

Orbital travel diameter ..................................

........................ 1,6 mm

Do not use this product in any other way as stated for normal use.

Dimensions of grinding plate .......................

..............110 x 105 mm

Weight without cable ...................................

........................ 1,5 kg

EC-DECLARATION OF CONFORMITY

Noise/vibration information

We declare under our sole responsibility that this product is

Measured values determined according to EN 60 745.

in conformity with the following standards or standardized

Typically, the A-weighted noise levels of the tool are:

documents: EN 60745, EN 55014-1, EN 55014-2,

Sound pressure level (K = 3 dB(A))

..............

...................... 76,5 dB(A)

EN 61000-3-2, EN 61000-3-3, in accordance with the regulations

Sound power level (K = 3 dB(A))

..................

...................... 87,5 dB(A)

2006/42/EC, 2004/108/EC

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined

according to EN 60745.

2

Vibration emission value a

.........................................

.......... 4,8 m/s

h

Rainer Kumpf

2

Uncertainty K= .......................................................

.......... 1,5 m/s

Manager Product Development

Winnenden, 2010-13-01

Authorized to compile the technical file

WARNING!

The vibration emission level given in this information sheet has

MAINS CONNECTION

been measured in accordance with a standardised test given in

Connect only to single-phase AC current and only to the system

EN 60745 and may be used to compare one tool with another. It

voltage indicated on the rating plate. It is also possible to connect

may be used for a preliminary assessment of exposure.

GB

to sockets without an earthing contact as the design conforms to

The declared vibration emission level represents the main

safety class II.

applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the

MAINTENANCE

vibration emission may differ. This may signicantly increase the

exposure level over the total working period.

The ventilation slots of the machine must be kept clear at all times.

An estimation of the level of exposure to vibration should also

Use only AEG accessories and spare parts. Should components

take into account the times when the tool is switched off or when

need to be replaced which have not been described, please

it is running but not actually doing the job. This may signicantly

contact one of our service agents (see our list of guarantee/

reduce the exposure level over the total working period.

service addresses).

Identify additional safety measures to protect the operator

If needed, an exploded view of the tool can be ordered. Please

from the effects of vibration such as: maintain the tool and the

state the Article No. as well as the machine type printed on

accessories, keep the hands warm, organisation of work patterns.

the label and order the drawing at your local service agents or

directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10,

WARNING!

D-71364 Winnenden, Germany.

Read all safety warnings and all instructions, including those

SYMBOLS

given in the accompanying brochure. Failure to follow the

warnings and instructions may result in electric shock, re and/or

serious injury. Save all warnings and instructions for future

Please read the instructions carefully before

reference.

starting the machine.

SAFETY INSTRUCTIONS

Always disconnect the plug from the socket

Wear ear protectors. Exposure to noise can cause hearing loss.

before carrying out any work on the machine

Appliances used at many different locations including open air

should be connected via a residual current device of 30 mA or less.

Accessory - Not included in standard equipment,

Always wear goggles when using the machine. It is recommended

available as an accessory.

to wear gloves, sturdy non slipping shoes and apron.

Always disconnect the plug from the socket before carrying out any

Do not dispose of electric tools together with

work on the machine.

household waste material! In observance of

Only plug-in when machine is switched off.

European Directive 2002/96/EC on waste

Keep mains lead clear from working range of the machine. Always

electrical and electronic equipment and its

lead the cable away behind you.

implementation in accordance with national law,

electric tools that have reached the end of

Before use check machine, cable, and plug for any damages or

their life must be collected separately and returned

material fatigue. Repairs should only be carried out by authorised

to an environmentally compatible recycling facility.

Service Agents.

The dust produced when using this tool may be harmful to health

(e.g. when working oak or beech wood, stones, paint, which could

contain lead or other harmful chemicals). Do not inhale the dust.

Use a dust absorption system and wear a suitable dust protection

mask. Remove deposited dust thoroughly, e.g. with a vacuum

cleaner.

Do not use machines on any material containing asbestos.

This machine is suitable only for dry sanding.

English

6