AEG EX 125 ES 416100: English

Before use check machine, cable, and plug for any damages or

TECHNICAL DATA Random orbital sander

material fatigue. Repairs should only be carried out by authorised

EX 125 ES

Service Agents.

Rated input ..................................................................300 W

The dust produced when using this tool may be harmful to health

-1

No-load speed ..............................................7000–12000 min

(e.g. when working oak or beech wood, stones, paint, which could

Orbital travel diameter ..........................................2,4 mm ( 3/32“)

contain lead or other harmful chemicals). Do not inhale the dust.

Dimensions of grinding plate .......................................125 mm

Use a dust absorption system and wear a suitable dust protection

Weight without cable ...................................................1,7 kg

mask. Remove deposited dust thoroughly, e.g. with a vacuum

cleaner.

Noise/vibration information

Measured values determined according to EN 60 745.

Do not use machines on any material containing asbestos.

Typically, the A-weighted noise levels of the tool are:

This machine is suitable only for dry sanding.

Sound pressure level (K = 3 dB(A))

..............................80,0 dB (A)

Sound power level (K = 3 dB(A))..................................91,0 dB (A)

SPECIFIED CONDITIONS OF USE

Wear ear protectors!

This random orbital sander is a versatile machine. The following

Total vibration values (vector sum in the three axes) determined

work can be carried out with it: Coarse sanding and grinding, Fine

according to EN 60745.

sanding and polishing, Rubbing down weather-beaten paint,

2

Vibration emission value a

............................................7,4 m/s

h

Polishing up scratches on acrylic glass, Etc.

2

Uncertainty K = .............................................................1,5 m/s

Do not use this product in any other way as stated for normal use.

ECDECLARATION OF CONFORMITY

GB

WARNING!

We declare under our sole responsibility that this product is

The vibration emission level given in this information sheet has

in conformity with the following standards or standardized

been measured in accordance with a standardised test given in EN

documents: EN 60745, EN 55014-1, EN 55014-2,

60745 and may be used to compare one tool with another. It may be

EN 61000-3-2, EN 61000-3-3, in accordance with the regulations

used for a preliminary assessment of exposure.

2006/42/EC, 2004/108/EC

The declared vibration emission level represents the main

applications of the tool. However if the tool is used for dierent

applications, with dierent accessories or poorly maintained, the

vibration emission may dier. This may signicantly increase the

Rainer Kumpf

exposure level over the total working period.

Winnenden, 2010-07-20

Manager Product Development

Authorized to compile the technical le.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched o or when

MAINS CONNECTION

it is running but not actually doing the job. This may signicantly

reduce the exposure level over the total working period.

Connect only to single-phase AC current and only to the system

voltage indicated on the rating plate. It is also possible to connect

Identify additional safety measures to protect the operator

to sockets without an earthing contact as the design conforms to

from the eects of vibration such as: maintain the tool and the

safety class II.

accessories, keep the hands warm, organisation of work patterns.

MAINTENANCE

WARNING!

The ventilation slots of the machine must be kept clear at all times.

Read all safety warnings and all instructions, including

those given in the accompanying brochure. Failure to follow

Use only AEG accessories and spare parts. Should components need

the warnings and instructions may result in electric shock, re

to be replaced which have not been described, please contact one

and/or serious injury. Save all warnings and instructions for

of our service agents (see our list of guarantee/service addresses).

future reference.

If needed, an exploded view of the tool can be ordered. Please state

the Article No. as well as the machine type printed on the label

SAFETY INSTRUCTIONS

and order the drawing at your local service agents or directly at:

AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden,

Wear ear protectors. Exposure to noise can cause hearing loss.

Germany.

Appliances used at many dierent locations including open air

should be connected via a residual current device (FI, RCD, PRCD)

of 30mA or les.

Always wear goggles when using the machine. It is recommended

to wear gloves, sturdy non slipping shoes and apron.

Always disconnect the plug from the socket before carrying out any

work on the machine.

Only plug-in when machine is switched o.

Keep mains lead clear from working range of the machine. Always

lead the cable away behind you.

English

6

SYMBOLS

Please read the instructions carefully before

starting the machine.

CAUTION! WARNING! DANGER!

Always disconnect the plug from the socket before

carrying out any work on the machine.

Accessory - Not included in standard equipment,

available as an accessory.

Do not dispose of electric tools together with

household waste material! In observance of

European Directive 2002/96/EC on waste electrical

and electronic equipment and its implementation

in accordance with national law, electric tools that

GB

have reached the end of their life must be collected

separately and returned to an environmentally

compatible recycling facility.

English

7