AEG BSS 12C: 12 13 ENGLISH ENGLISH

TECHNICAL DATA Cordless Impact Screwdriver

BSS 12 C

BSS 12 C

For an optimum life-time, after use, the battery packs have

to be fully charged.

Tool reception ..........................................................................

.........................1/4" (6,35 mm)

.........................1/4" (6,35 mm)

-1

-1

No-load speed .........................................................................

....................0-1800 min

....................0-1800 min

To obtain the longest possible battery life remove the battery

-1

-1

Impact range............................................................................

....................0-2400 min

....................0-2400 min

pack from the charger once it is fully charged.

Torque......................................................................................

......................... 113 Nm

......................... 113 Nm

For battery pack storage longer than 30 days:

Battery voltage.........................................................................

...........................12 V

...........................12 V

Store the battery pack where the temperature is below 27°C

Weight according EPTA-Procedure 01/2003 (1,5 Ah) .............

..........................1,2 kg

..........................1.2 kg

and away from moisture

Store the battery packs in a 30% - 50% charged condition

Noise/vibration information

Every six months of storage, charge the pack as normal.

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

BATTERY PACK PROTECTION

Sound pressure level (K = 3 dB(A)) .......................................

........................74,0 dB (A)

........................74.0 dB (A)

The battery pack has overload protection that protects it

Sound power level (K = 3 dB(A)) ............................................

........................85,0 dB (A)

........................85.0 dB (A)

from being overloaded and helps to ensure long life.

Wear ear protectors!

Under extreme stress the battery electronics switch off the

Total vibration values (vector sum in the three axes)

machine automatically. To restart, switch the machine off

determined according to EN 60745.

and then on again. If the machine does not start up again,

2

2

Vibration emission value a

..................................................

..........................4,3 m/s

..........................4.3 m/s

the battery pack may have discharged completely. In this

h

2

2

Uncertainty K= ......................................................................

..........................1,5 m/s

..........................1.5 m/s

case it must be recharged in the battery charger.

MAINTENANCE

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

Use only AEG accessories and spare parts. Should

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

components need to be replaced which have not been

described, please contact one of our AEG service agents

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

(see our list of guarantee/service addresses).

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

the exposure level over the total working period.

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

printed on the label and order the drawing at your local

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

service agents or directly at: AEG Electric Tools,

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

accessories, keep the hands warm, organisation of work patterns.

SYMBOLS

WARNING! Read all safety warnings and all

SPECIFIED CONDITIONS OF USE

instructions, including those given in the accompanying

Please read the instructions carefully before

The cordless impact driver can be used to tighten and

brochure. Failure to follow the warnings and instructions

starting the machine.

loosen nuts and bolts wherever no mains connection is

may result in electric shock, re and/or serious injury.

available.

Save all warnings and instructions for future reference.

Do not use this product in any other way as stated for

SAFETY INSTRUCTIONS

normal use.

Remove the battery pack before starting any

work on the machine.

Wear ear protectors. Exposure to noise can cause hearing

EC-DECLARATION OF CONFORMITY

loss.

We declare under our sole responsibility that this product is

Hold power tool by insulated gripping surfaces, when

in conformity with the following standards or standardized

performing an operation where the fastener may

Do not dispose of electric tools together with

documents.

contact hidden wiring. Fasteners contacting a „live“ wire

household waste material! In observance of

EN 60745-1:2009 + A11:2010

may make exposed metal parts of the power tool „live“ and

European Directive 2002/96/EC on waste

EN 60745-2-2:2010

could give the operator an electric shock.

electrical and electronic equipment and its

EN 55014-1:2006 + A1:2009 + A2:2011

Sawdust and splinters must not be removed while the

implementation in accordance with national law,

EN 55014-2:1997 + A1:2001 + A2:2008

machine is running.

electric tools that have reached the end of their

in accordance with the regulations

life must be collected separately and returned to

When working in walls ceiling, or oor, take care to avoid

2011/65/EU (RoHs)

an environmentally compatible recycling facility.

electric cables and gas or waterpipes.

2006/42/EC

2004/108/EC

Remove the battery pack before starting any work on the

machine.

Do not dispose of used battery packs in the household

refuse or by burning them. AEG Distributors offer to retrieve

old batteries to protect our environment.

Winnenden, 2012-09-11

Do not store the battery pack together with metal objects

(short circuit risk).

Use only System PCLS chargers for charging System PCLS

battery packs. Do not use battery packs from other systems.

Rainer Kumpf

Director Product Development

Battery acid may leak from damaged batteries under

extreme load or extreme temperatures. In case of contact

Authorized to compile the technical le

with battery acid wash it off immediately with soap and

water. In case of eye contact rinse thoroughly for at least 10

BATTERIES

minutes and immediately seek medical attention.

New battery packs reach full loading capacity after 4 - 5

chargings and dischargings. Battery packs which have not

been used for some time should be recharged before use.

Temperatures in excess of 50°C (122°F) reduce the

performance of the battery pack. Avoid extended exposure

to heat or sunshine (risk of overheating).

The contacts of chargers and battery packs must be kept

clean.

12 13

ENGLISH

ENGLISH