AEG BSB 14G NC-142C 431989: English
English: AEG BSB 14G NC-142C 431989
TECHNICAL DATA
Cordless drill Cordless impact drill
BS 12G BS 14G BSB 12G BSB 14G
Drilling capacity in steel ..........................................................
........10 mm ..............10 mm................10 mm ...................10 mm
Drilling capacity in wood .........................................................
........30 mm ..............32 mm................30 mm ...................32 mm
Drilling capacity in brick and tile .............................................
............ - ....................... - ......................6 mm .....................8 mm
Wood screws (without pre-drilling) ..........................................
.......4,2 mm .............4,2 mm...............4,2 mm ..................4,2 mm
No-load speed 1st gear ..........................................................
...0-350 /min ....... 0-400 /min ..........0-350 /min .............0-400 /min
No-load speed 2nd gear .........................................................
.0-1350 /min ..... 0-1400 /min ........0-1350 /min ...........0-1400 /min
Rate of percussion under load max. .......................................
............ - ....................... - ..............20
250 /min ............21
000 /min
Torque .....................................................................................
........30 Nm ...............32 Nm ................ 30 Nm ...................32 Nm
Battery voltage ........................................................................
........12 V ...............14,4 V ................... 12 V ...................14,4 V
Drill opening range
.....1-10 mm .......... 1-10 mm.............1-10 mm ................1-10 mm
.................................................................
Weight with battery (1.4 Ah)
.....1,65 kg ..............1,95 kg .................1,8 kg ....................2,1 kg
...................................................
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A))
........90 dB(A) ...........90 dB(A) ............. 90 dB(A) ................90 dB(A)
..........................................
Sound power level (K = 3 dB(A)) ..............................................
......101 dB(A) .........101 dB(A) ........... 101 dB(A) ..............101 dB(A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
GB
2
2
Percussion drilling into concrete ...............................................
............ - ....................... - .................15,6 m/s
...............13,7 m/s
2
2
Uncertainty K= .........................................................................
............ - ....................... - ...................1,5 m/s
.................1,5 m/s
2
2
2
2
Drilling into metal ......................................................................
...< 2,5 m/s
...... < 2,5 m/s
.........< 2,5 m/s
.............< 2,5 m/s
2
2
2
2
Uncertainty K= .........................................................................
.......1,5 m/s
............1,5 m/s
.............1,5 m/s
.................1,5 m/s
2
2
2
2
Screwing ..................................................................................
...< 2,5 m/s
....... < 2,5 m/s
.........< 2,5 m/s
.............< 2,5 m/s
2
2
2
2
Uncertainty K= .........................................................................
.......1,5 m/s
............1,5 m/s
.............1,5 m/s
.................1,5 m/s
*1 Measured according to AEG norm N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING!
Do not dispose of used battery packs in the household refuse or
Read all safety warnings and all instructions, including those
by burning them. AEG Distributors offer to retrieve old batteries to
given in the accompanying brochure. Failure to follow the warnings
protect our environment.
and instructions may result in electric shock, fire and/or serious
Do not store the battery pack together with metal objects (short
injury. Save all warnings and instructions for future reference.
circuit risk).
Use only System GBS chargers for charging System GBS battery
SAFETY INSTRUCTIONS
packs. Do not use battery packs from other systems.
Wear ear protectors. Exposure to noise can cause hearing loss.
No metal parts must be allowed to enter the battery section of the
Hold power tool by insulated gripping surfaces, when performing
charger (short circuit risk).
an operation where the fastener may contact hidden wiring.
Never break open battery packs and chargers and store only in dry
Fasteners contacting a “live” wire may make exposed metal parts of
rooms. Keep dry at all times.
the power tool “live” and could give the operator an electric shock.
Battery acid may leak from damaged batteries under extreme load
Always wear goggles when using the machine. It is recommended to
or extreme temperatures. In case of contact with battery acid wash
wear gloves, sturdy non slipping shoes and apron.
it off immediately with soap and water. In case of eye contact rinse
Sawdust and splinters must not be removed while the machine is
thoroughly for at least 10 minutes and immediately seek medical
running.
attention.
When working in walls ceiling, or floor, take care to avoid electric
The dust produced when using this tool may be harmful to health.
cables and gas or waterpipes.
Do not inhale the dust. Wear a suitable dust protection mask.
Remove the battery pack before starting any work on the machine.
English
10
SPECIFIED CONDITIONS OF USE
BS 12G, BS 14G: The Cordless drill is designed for drilling and
screwdriving for independent use away from mains supply.
BSB 12G, BSB 14G: The Cordless impact drill is designed for drilling,
percussion drilling, as well as screwdriving for independent use
away from mains supply.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
EN 60745, EN 55014-1, EN 55014-2, in accordance with the
regulations 2006/42/EC, 2004/108/EC
Rainer Kumpf
Manager Product Development
Winnenden, 2010-01-19
Authorized to compile the technical file
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
GB
and dischargings. Battery packs which have not been used for some
time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
ADVICE FOR OPERATION
The gears can be only changed when the machine is switched off
MAINTENANCE
Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our AEG service agents (see our list of guarantee/service
addresses). If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type printed
on the label and order the drawing at your local service agents or
directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10,
D-71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Remove the battery pack before starting any work on
the machine.
Do not dispose of electric tools together with household
waste material! In observance of European Directive
2002/96/EC on waste electrical and electronic
equipment and its implementation in accordance with
national law, electric tools that have reached the end of
their life must be collected separately and returned to an
environmentally compatible recycling facility.
English
11
