Pioneer MVH-X460UI: Using this unit Using this unit

Section

Using this unit

Using this unit

02

This unit is equipped with a subwoofer output

SLA (source level adjustment)

You can use this setting to adjust the display

1 Press M.C. to display the setting mode.

English

which can be turned on or off.

brightness.

This function prevents the volume from changing

2 Press M.C. to select the segment of the clock

1 Press M.C. to select the desired setting.

display you wish to set.

The range of settings available for BRIGHTNESS

too dramatically when the source switches.

NOR (normal phase)—REV (reverse phase)—

Hour—Minute

will vary depending on whether DIMMER is on or

! Settings are based on the FM volume level,

OFF (subwoofer off)

which remains unchanged.

3 Turn M.C. to adjust the clock.

off. For details, refer to DIMMER (dimmer) on page

9.

SUB.W CTRL (subwoofer adjustment)

! The MW/LW volume level can also be adjusted

12H/24H (time notation)

1 Press M.C. to display the setting mode.

with this function.

Only frequencies lower than those in the selected

2 Turn M.C. to select the desired setting.

! USB, iPod and APP are all set to the same set-

range are outputted from the subwoofer.

1 Press M.C. to select the desired setting.

DIMMER on: 1 to 4

ting automatically.

1 Press M.C. to display the setting mode.

12H (12-hour clock)—24H (24-hour clock)

DIMMER off: 1 to 5

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

2 Turn M.C. to adjust the source volume.

INFO DISPLAY (sub information)

PW SAVE (power saving)

Cut-off frequency—Output level—Slope level

Adjustment range: +4 to –4

Rates that can be adjusted will flash.

The type of text information displayed in the sub

Switching this function on enables you to reduce

3 Turn M.C. to select the desired setting.

information section can be toggled.

the consumption of battery power.

Cut-off frequency: 50HZ—63HZ—80HZ—

1 Press M.C. to display the setting mode.

! Turning on the source is the only operation al-

100HZ—125HZ—160HZ—200HZ

System menu

2 Turn M.C. to select the desired setting.

lowed when this function is on.

Output level: –24 to +6

Important

SPEANA—LEVEL METER—SOURCE—CLOCK

1 Press M.C. to turn the power save on or off.

Slope level: –12— –24

—OFF

PW SAVE (power saving) is canceled if the ve-

! The signal bar indicator displays for SPEANA

BASS BOOST (bass boost)

hicle battery is disconnected and will need to be

or LEVEL METER when the source is set to

turned back on once the battery is reconnected.

Selecting the illumination color

RADIO.

1 Press M.C. to display the setting mode.

When PW SAVE (power saving) is off, depend-

2 Turn M.C. to select a desired level.

ing on connection methods, the unit may con-

AUTO PI (auto PI seek)

Illumination function menu

0 to +6 is displayed as the level is increased or

tinue to draw power from the battery if your

The unit can automatically search for a different

1 Press M.C. to display the main menu.

decreased.

vehicle’s ignition doesn’t have an ACC (acces-

station with the same programming, even during

sory) position.

HPF SETTING (high pass filter adjustment)

preset recall.

2 Turn M.C. to display ILLUMI and press to

1 Press M.C. to turn Auto PI seek on or off.

select.

Use this function when wanting to listen only to

1 Press M.C. to display the main menu.

high-frequency sounds. Only frequencies higher

AUX (auxiliary input)

3 Turn M.C. to select the illumination func-

2 Turn M.C. to change the menu option

than the high-pass filter (HPF) cutoff are output

tion.

and press to select SYSTEM.

Activate this setting when using an auxiliary de-

from the speakers.

Once selected, the following audio functions

vice connected to this unit.

1 Press M.C. to display the setting mode.

can be adjusted.

3 Turn M.C. to select the system menu

1 Press M.C. to turn AUX on or off.

2 Press M.C. to cycle between the following:

function.

Cut-off frequency—Slope level

DIMMER (dimmer)

KEY COLOR (key section color setting)

Once selected, the following system menu func-

3 Turn M.C. to select the desired setting.

tions can be adjusted.

Cut-off frequency: OFF—50HZ—63HZ—80HZ

1 Press M.C. to turn the dimmer on or off.

You can select desired colors for the keys of this

—100HZ—125HZ—160HZ—200HZ

! You can also change the dimmer setting by

unit.

Slope level: –12— –24

LANGUAGE (multi-language)

pressing and holding

/DIMMER.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the illumination color.

1 Press M.C. to select the desired setting.

BRIGHTNESS (brightness adjustment)

! Preset colors (ranging from WHITE to

РУС (Russian)—TUR (Turkish)—ENG (Eng-

BLUE)

lish)

! SCAN (cycle through a variety of colors au-

tomatically)

CLOCK SET (setting the clock)

! CUSTOM (customized illumination color)

En

9