Pioneer MVH-X460UI: Installation Installation

Section

Installation

Installation

03

DIN Front-mount

2 Screw in one screw on each side to hold

Removing the unit

the unit in place.

English

1 Insert the mounting sleeve into the dash-

1 Remove the trim ring.

board.

For installation in shallow spaces, use the sup-

3

plied mounting sleeve. If there is enough space,

1

use the mounting sleeve that came with the ve-

hicle.

2

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

1 Tapping screw (5 mm × 8 mm)

2 Mounting bracket

1 Trim ring

place.

3 Dashboard or console

2 Notched tab

1

! Releasing the front panel allows easier ac-

cess to the trim ring.

Using the included bracket

! When reattaching the trim ring, point the

You can also use the included bracket to mount

side with the notched tab down.

the unit. Check to make sure that the included

bracket matches your particular model of ve-

2 Insert the supplied extraction keys into

2

hicle and then attach it to the unit as shown

both sides of the unit until they click into

below.

place.

1 Dashboard

2 Mounting sleeve

3 Pull the unit out of the dashboard.

# Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

1

or other malfunctions.

2

DIN Rear-mount

1 Line up the holes on the mounting brack-

et with the holes on the sides of the unit to

attach the bracket.

Removing and re-attaching the

2

front panel

You can remove the front panel to protect your

1

unit from theft.

For details, refer to Removing the front panel and

Re-attaching the front panel on page 4.

1 Screw

2 Bracket

En

13