Pioneer DEH-1700UB: Settings

Purpose Operation

AUX

Change drives in USB device

Press BAND/.

1

Insert the stereo mini plug into the AUX input jack.

(Devices that support the USB mass storage

2 Press SRC/OFF to select [AUX] as the source.

device class protocol only)

NOTE

* Compressed audio files only

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 9).

English

Operations

Settings

You can make various adjustments in the FUNCTION settings (page 7).

Note that the following operations do not work for an AUX device. To operate an AUX

You can adjust various settings in the main menu.

device, use the device itself.

1 Press the M.C. dial to display the main menu.

Purpose Operation

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

Select a folder/album* Press 1/ or 2/.

• FUNCTION settings (page 7)

Select a track/song (chapter) Press or .

• AUDIO settings (page 8)

Fast forward or reverse Press and hold or .

• SYSTEM settings (page 9)

• ILLUMINATION settings (page 9)

Search for a file from a list 1 Press to display the list.

2 Turn the M.C. dial to select the desired

3 Turn the M.C. dial to select the options, then press to confirm.

file (folder) name or category, then press

to confirm.

3 Turn the M.C. dial to select the desired

FUNCTION settings

file, then press to confirm.

Playback starts.

The menu items vary according to the source.

View a list of the files in the selected folder/

Press the M.C. dial when a folder/category

Menu Item Description

category*

is selected.

FM SETTING

Play a song in the selected folder/category* Press and hold the M.C. dial when a folder/

category is selected.

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast

signal conditions of the FM band signal.

Repeat play Press 6/.

(Available only when FM band is selected.)

Random play Press 5/.

BSM

Pause/resume playback Press 4/PAUS E.

Store the six strongest stations on the number

Sound retriever Press 3/S.Rtrv.

buttons (1/ to 6/ ) automatically.

[1]: Effective for low compression rates

[2]: Effective for high compression rates

REGIONAL

Return to root folder (USB only)* Press and hold BAND/.

[ON], [OFF] Limit the reception to the specific regional

programs when AF (alternative frequencies

Switch between compressed audio and CD-

Press BAND/.

search) is selected. (Available only when FM

DA (CD only)

band is selected.)

7En

Menu Item Description

LOCAL

FM: [OFF], [LV1], [LV2], [LV3], [LV4]

Restrict the tuning station according to the

MW/LW: [OFF], [LV1], [LV2]

signal strength.

TA

[ON], [OFF] Receive current traffic information if available.

(Available only when FM band is selected.)

AF

[ON], [OFF] Allow the unit to retune to a different frequency

providing the same station. (Available only when

FM band is selected.)

NEWS

[ON], [OFF] Interrupt the currently selected source with

news programs. (Available only when FM band is

selected.)

SEEK

[MAN], [PCH] Assign or buttons to seek the stations

one by one (manual tuning) or select a station

from the preset channels.

S.RTRV

[1] (effective for low compression

Enhance compressed audio and restore rich

rates), [2] (effective for high

sound. (Not available when the FLAC file is

compression rates), [OFF]

played back.)

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

Adjust the left and right speaker balance.

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*3 Not available when [OFF] is selected in [SUB.W].

8En

Menu Item Description

EQ SETTING

[SUPER BASS], [POWERFUL],

Select or customize the equalizer curve.

[NATURAL], [VOCAL], [CUSTOM1],

[CUSTOM1] can be set separately for each source.

[CUSTOM2], [FLAT]

However, each of the below combinations are set

to the same setting automatically.

Select an equalizer band and

[CUSTOM2] is a shared setting used for all

level for further customizing.

sources.

Equalizer band: [80HZ], [250HZ],

You can also switch the equalizer by pressing

[800HZ], [2.5KHZ], [8KHZ]

repeatedly.

Equalizer level: [+6] to [–6]

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

Only frequencies lower than those in the

[63HZ], [80HZ], [100HZ], [125HZ],

selected range are output from the subwoofer.

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

BASS BOOST

[0] to [+6] Select the bass boost level.

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

Only frequencies higher than the high-pass filter

[63HZ], [80HZ], [100HZ], [125HZ],

(HPF) cutoff are output from the speakers.

[160HZ], [200HZ]

Slope level: [–12], [–24]

SLA

[+4] to [–4] Adjust the volume level for each source except

FM.

SYSTEM settings

ILLUMINATION settings

You can also access to these menus when the unit is turned off.

Menu Item Description

Menu Item Description

DIM SETTING

LANGUAGE

[SYNC CLOCK], [MANUAL] Change the display brightness.

English

[ENG](English), [РУС](Russian),

Select the language to display the text

BRIGHTNESS

[TUR](Turkish)

information from a compressed audio file.

[1] to [10] Change the display brightness.

CLOCK SET

The available setting ranges differ depending on

Set the clock (page 5).

[DIM SETTING].

12H/24H

[12H], [24H] Select the time notation.

AUTO PI

[ON], [OFF] Search for a different station with the same

programming, even if using a preset station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

connected to the unit.

MUTE MODE (Not available for DEH-1700UBA)

[MUTE], [20dB ATT], [10dB ATT] Mute or attenuate sound automatically when a

signal from equipment with a mute function is

received.

PW SAVE*

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

allowed when this function is on.

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once

the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may

continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory)

position.

9En