Pioneer DEH-1700UB: Radio
Radio: Pioneer DEH-1700UB
NOTE
2 Turn the M.C. dial to select the options, then press to confirm.
The options vary depending on the unit.
To proceed to the next menu option, you need to confirm your selection.
Menu Item Description
Menu Item Description
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
LANGUAGE Select the language to display the text information from a
[100], [50]
compressed audio file.
[ENG](English),
SP-P/O MODE Select when there is a full-range speaker connected to the rear
English
[РУС](Russian),
speaker output leads and there is a subwoofer connected to the
[TUR](Turkish)
[REAR/SUB.W]
RCA output.
CLOCK SET Set the clock.
[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
the rear speaker output leads and there is a subwoofer
[100], [50]
connected to the RCA output.
[REAR/REAR] Select when there are full-range speakers connected to the rear
3 [QUIT :YES] appears when all the settings have been made.
speaker output leads and RCA output. If there is a full-range
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],
speaker connected to the rear speaker output leads, and the
then press to confirm.
RCA output is not used, you may select either [REAR/SUB.W] or
[REAR/REAR].
4 Press the M.C. dial to confirm the settings.
SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be
NOTES
restarted automatically.
[YES], [CANCEL]
• You can cancel the menu setting by pressing SRC/OFF.
(Some of the settings may be retained even after resetting the
• These settings can be made at any time from the SYSTEM settings (page 9) and INITIAL settings
unit.)
(page 5).
Canceling the demonstration display (DEMO OFF)
Radio
1 Press the M.C. dial to display the main menu.
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
2 Turn the M.C. dial to select [SYSTEM], then press to confirm.
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.
stations.
4 Turn the M.C. dial to select [YES], then press to confirm.
Receiving preset stations
INITIAL settings
1 Press SRC/OFF to select [RADIO].
1 Press and hold SRC/OFF until the unit turns off.
2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
2 Press and hold SRC/OFF to display the main menu.
3 Press a number button (1/ to 6/).
3 Turn the M.C. dial to select [INITIAL], then press to confirm.
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
4 Turn the M.C. dial to select an option, then press to confirm.
FUNCTION settings (page 8).
5En
Оглавление
- Table of Contents
- Before You Start
- Getting Started
- Radio
- CD/USB/AUX
- Settings
- Connections/Installation
- Additional Information
- Table des matières
- Avant de commencer
- Mise en route
- Radio
- CD/USB/AUX
- Réglages
- Raccordements/Installation
- Informations complémentaires
- Sommario
- Prima di iniziare
- Operazioni preliminari
- Radio
- CD/USB/AUX
- Impostazioni
- Connessioni/Installazione
- Informazioni aggiuntive
- Índice
- Antes de empezar
- Procedimientos iniciales
- Radio
- CD/USB/AUX
- Ajustes
- Conexiones/instalación
- Información complementaria
- Inhaltsverzeichnis
- Bevor Sie beginnen
- Erste Schritte
- Radio
- CD/USB/AUX
- Einstellungen
- Anschlüsse/Einbau
- Zusätzliche Informationen
- Inhoud
- Vóór u begint
- Aan de slag
- Radio
- CD/USB/AUX
- Instellingen
- Verbindingen/installatie
- Aanvullende informatie
- Содержание
- Перед началом эксплуатации
- Начало работы
- Радио
- Компакт-диск/USB/AUX
- Настройки
- Подключения/Установка
- Дополнительная информация