Pioneer DEH-1220MP: Operating this unit Other Functions
Operating this unit Other Functions: Pioneer DEH-1220MP
Section
02
Operating this unit
Other Functions
TITLE (multi language)
This unit can display the text information of a com-
Important
pressed audio file even if they are embedded in a
Power save mode is cancelled if the vehicle bat-
Western European or Russian language.
! If the embedded language and the selected lan-
tery is disconnected and will need to be turned
guage setting are not the same, text information
back on once the battery is reconnected. When
may not be displayed properly.
power save is off, depending on connection meth-
! Some characters may not be displayed properly.
ods, the unit may continue to draw power from
1 Press c or d to select the language.
the battery if your vehicle's ignition switch doesn't
EUR (European )—RUS (Russian)
have an ACC (accessor y position).
Using the AUX source
Adjusting initial settings
1 Insert the stereo mini plug into the
1 Press SRC/OFF and hold until the unit
AUX input jack.
turns off.
2 Press SRC/OFF to select AUX as the
2 Press SRC/OFF and hold until function
source.
name appears in the display.
3 Press F (function) to select the initial
Sound muting
setting.
After selecting, perform the following proce-
Sound is muted automatically when:
dures to set the initial setting.
! A call is made or received using a cell
phone connected to this unit.
FM (FM tuning step)
! Voice guidance is output from a connected
Pioneer navigation unit.
Normally the FM tuning step employed by seek tuning
is 50 kHz. When AF or TA is on, the tuning step auto-
The sound is turned off, MUTE is displayed
matically changes to 100 kHz. It may be preferable to
and no audio adjustments, except volume con-
set the tuning step to 50 kHz when AF is on.
trol, are possible. Operation returns to normal
! The tuning step remains at 50 kHz during manual
when the phone connection or the voice gui-
tuning.
dance is ended.
1 Press c or d to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
A-PI (auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1 Press a or b to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using auxiliary device con-
nected to this unit.
1 Press a or b to turn auxiliary setting on or off.
SAVE (power saving)
Switching this function on enables you to reduce the
consumption of battery power.
! Turning on the source is the only operation al-
lowed when this function is on.
1 Press a or b to turn the power save on or off.
8
En
Оглавление
- Before You Start
- Operating this unit
- Operating this unit Other Functions
- Additional Information
- Avant de commencer
- Appareil central
- Utilisation de l’appareil
- Informations complémentaires Dépannage
- Informations complémentaires
- Informations complémentaires Droits d’auteur et marques commerciales
- Informations complémentaires
- Prima di iniziare
- Unità principale
- Funzionamento dell’unità
- Informazioni supplementari Risoluzione dei problemi
- Informazioni supplementari
- Informazioni supplementari Copyright e marchi registrati
- Informazioni supplementari
- Antes de comenzar
- Utilización de esta unidad
- Información adicional Solución de problemas
- Información adicional Pautas para el manejo
- Información adicional
- Bevor Sie beginnen
- Bedienung des Geräts
- Bedienung des Geräts Audio-Einstellungen
- Bedienung des Geräts
- Zusätzliche Informationen Fehlerbehebung
- Zusätzliche Informationen Handhabungsrichtlinien
- Zusätzliche Informationen
- Vóór u begint
- Bediening van het toestel Hoofdtoestel
- Bediening van het toestel
- Aanvullende informatie Problemen verhelpen
- Aanvullende informatie Aanwijzingen voor het
- Aanvullende informatie
- Перед началом эксплуатации
- Управление данным устройством
- Дополнительная информация Устранение
- Дополнительная информация Рекомендации по
- Последовательность
- Дополнительная информация