AEG bss 4817: English

50

English

If your playing device supports the A2DP profile (Advanced Audio Distribution Profile)

and has a music-player function, then you can also wirelessly transfer music to the de-

vice. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-

audio signals are wirelessly transferred between the playing device (source) and the

receiving device. To be able to operate the source by remote control, the player needs

tosupporttheAVRCPprole(Audio Video Remote Control Profile).

Due to the different device manufacturers, models, and software versions, a full func-

tionality cannot be guaranteed.

Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the devices.

1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone).

For this, refer to the operation manual of your player.

2. Turn on the volume by briefly pressing the

button (1). The indicator light (2) will

start to flash rapidly after a short time. The device is now set to the pairing mode.

3. Chose the Bluetooth menu in your player and register the device in your player. For

this, refer to the operation manual of your player. The device “BSS 4817” will show

in your player as a selection.

4. Now enter the password “0000” in your player, depending on the device manufac-

turers, model, and software version.

If the playback device was recognized, the bluetooth indictator light (2) will blink slowly.

After successful registration, you can hear a signal and the bluetooth indictator light (2)

blink slowly.

NOTE:

• Dependingonthedevicemanufacturer,youneedtoperformtheregistration

(PAIRING)againtoconnectthedevices.

• Inthecaseofproblemswiththepairingofaplaybackdevice,deactivatethe

WiFi-/ and mobile data function in your playback device.

• TheBluetoothcompatibilitycannotbeensuredfordevices(e.g.mobilephones)

getting released in the future.

• Toensureanoptimalconnection,makesurethatthebatteryofyourplayeris

completely charged.

51

English

NOTE:

• Someofthemobilephonebrandshaveanenergy-savingmode.Deactivate

the energy-saving mode as it can otherwise result in problems during the data

transfer through Bluetooth.

• Tobeabletotransferaudiodata,Bluetoothneedstostayactivatedinyour

player. Observe the operation manual of your player.

• Ifamobilephoneonwhichyouareplayingmusicreceivesacall,themusicwillbe

interrupted. Press the / button (6), to accept the call. The sound is replayed

by the loudspeaker. Speak into the microphone on the device or transfer the

conversation to your mobile phone. To do this, observe the overlay in the display

of the mobile phone. After you have ended the call, the devices are connected

to each other again and playback continues.

Operation

The device is equipped with multi functional buttons. For different functions press the

respective button briefly or press and hold.

On/Off (1)

• Turnontheloudspeakerbypressingthe

button (1). The charging indicator

light /Bluetooth indicator light (2) will start to blink.

NOTE : Automatic connection

If supported by your player (e.g. mobile phone), the devices will be connected

automatically. The prerequisite for this is:

• Thedeviceswerealreadyconnectedwitheachother.

• Bluetoothisactivatedinyourplayer.

• Keepthe

button (1) pressed for ca. 2 seconds to turn off the loudspeakers

again. The units are disconnected.

NOTE :

• Tosavethebattery,switchoffthespeakerwhennotinuse.

• IfnosuitableplaybackdeviceisrecognizedinBluetoothmodewithin

5 minutes, the device will automatically switch to standby.