AEG ST800XE 4935412950: 24 25 ENGLISHENGLISH

TECHNICAL DATA

Jig Saw

ST 700 E ST 800 XE

EC-DECLARATION OF CONFORMITY

SYMBOLS

Rated input ..............................................................................

.........................705 W ...........................705 W

We declare under our sole responsibility that this product is

Output ......................................................................................

.........................385 W ...........................385 W

in conformity with the following standards or standardized

-1

-1

Please read the instructions carefully before

Stroke rate under no–load .......................................................

................... 600-2700 min

................. 600-2700 min

documents.

starting the machine.

Lengths of stroke .....................................................................

...........................26 mm ..........................26 mm

EN 60745-1:2009 + A11:2010

Bevel cuts up to .......................................................................

......................... 45° .............................. 45°

EN 60745-2-11:2010

Cutting depth max. in:

EN 55014-1:2006 + A1:2009 + A2:2011

Wood ....................................................................................

......................... 110 mm ........................ 110 mm

EN 55014-2:1997 + A1:2001 + A2:2008

Always disconnect the plug from the socket

Steel .....................................................................................

...........................10 mm ..........................10 mm

EN 61000-3-2:2006 + A1:2009 + A2:2009

before carrying out any work on the

Aluminium ............................................................................

...........................25 mm ..........................25 mm

EN 61000-3-3:2008

machine.

Weight according EPTA-Procedure 01/2003 ...........................

..........................2,2 kg ............................ 2,3 kg

in accordance with the regulations

2011/65/EU (RoHs)

2006/42/EC

Noise/vibration information

Accessory - Not included in standard

2004/108/EC

Measured values determined according to EN 60 745.

equipment, available as an accessory.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) .......................................

...........................87 dB (A) ......................87 dB (A)

Sound power level (K = 3 dB(A)) ............................................

...........................98 dB (A) ......................98 dB (A)

Wear ear protectors!

Winnenden, 2012-09-07

Do not dispose of electric tools together

Total vibration values (vector sum in the three axes)

with household waste material! In

determined according to EN 60745.

observance of European Directive 2002/96/

Sawing of wood

EC on waste electrical and electronic

2

2

Vibration emission value a

...................................................

........................ 11,5 m/s

.......................11,5 m/s

equipment and its implementation in

h

2

2

Rainer Kumpf

Uncertainty K ........................................................................

..........................1,5 m/s

.........................1,5 m/s

accordance with national law, electric tools

Director Product Development

Sawing of sheet metal

that have reached the end of their life must

2

2

Vibration emission value a

...................................................

........................... 11 m/s

..........................11 m/s

Authorized to compile the technical le

be collected separately and returned to an

h

2

2

Uncertainty K ........................................................................

..........................1,5 m/s

.........................1,5 m/s

environmentally compatible recycling

MAINS CONNECTION

facility.

WARNING

Connect only to single-phase a.c. current and only to

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

the system voltage indicated on the rating plate. It is

Class II construction, tool in which

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

also possible to connect to sockets without an earthing

protection against electric shock does not

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

contact as the design conforms to safety class II.

rely on basic insulation only, but in which

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

additional safety precautions, such as

Under the effect of extreme electromagnetic interferences

the exposure level over the total working period.

double insulation or reinforced insulation,

from the outside, temporary variations in the speed of

are provided.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

rotation could arise in particular cases.

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

MAINTENANCE

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

The ventilation slots of the machine must be kept clear at all

times.

Use only AEG accessories and spare parts. Should

WARNING! Read all safety warnings and all

Plunge cuts without pre–drilling a hole are possible with soft

components need to be exchanged which have not been

instructions, including those given in the accompanying

materials (wood, light building materials for walls). Harder

described, please contact one of our AEG service agents

brochure. Failure to follow the warnings and instructions

materials (metals) must rst be drilled with a hole

(see our list of guarantee/service addresses).

may result in electric shock, re and/or serious injury.

corresponding to the size of the saw blade.

If needed, an exploded view of the tool can be ordered.

Save all warnings and instructions for future reference.

The dust produced when using this tool may be harmful to

Please state the ten-digit No. as well as the machine type

health. Do not inhale the dust. Wear a suitable dust

printed on the label and order the drawing at your local

SAFETY INSTRUCTIONS

protection mask.

service agents or directly at: AEG Electric Tools GmbH,

Wear ear protectors. Exposure to noise can cause hearing

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SPECIFIED CONDITIONS OF USE

loss.

This jig saw can cut wood, plastic and metal; it can cut

Hold power tool by insulated gripping surfaces, when

straight lines, bevels, curves, and internal cut–outs.

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Cutting

Do not use this product in any other way as stated for

accessory contacting a „live“ wire may make exposed metal

normal use.

parts of the power tool „live“ and could give the operator an

electric shock.

Appliances used at many different locations including open

air should be connected via a residual current device of

30 mA or less.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Sawdust and splinters must not be removed while the

machine is running.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

Always use the protective shields on the machine.

Do not use cracked or distorted saw blades.

24 25

ENGLISHENGLISH