AEG NE 5609: English

25

English

Usage

1. Remove the transparent protection cap.

2. Slidetheswitchtowards“OFF”inordertoturnontheappliance.

• Whentheswitchsnapsaudiblyintoplace,theapplianceworkscontinuously.

• Ifyoureleasetheswitchbeforeitsnapsaudiblyintoplace,theappliancewillswitch

off again.

3. Guide the tip of the shaving head into the nostril or auricle.

WARNING:

Only remove the prominent nose or ear hair. Do not forcefully push the appliance

into the nostril / auricle. You can hurt yourself when it is inserted too deep!

4. Slidetheswitchbacktowards“ON”afterusageinordertoswitchoffthedevice.

5. Clean the shaving head with the cleaning brush after usage.

6. Put the transparent protection cap back on.

Cleaning

WARNING:

• Donotsubmergetheunitinwater.

CAUTION:

• Donotuseawirebrushorotherabrasives.

• Donotusesharporabrasivecleaningagents.

1. Switch off the appliance before cleaning.

2. Remove the battery from the battery compartment.

3. Loosen the shaving head by turning it anticlockwise and remove it.

4. Remove remaining hair from the blade holder using the cleaning brush. You can also

blow off the remaining hair from the holder.

5. Place the shaving head onto the blade holder again. Turn it tight clockwise until it

snaps audibly into place.

6. Put the transparent protection cap back on.

Noise emission

Theworkplace-relatedemissionvalueislessthan70dB(A).