AEG BS 18C NiCd 411330: ENGLISH ENGLISH

TECHNICAL DATA

BATTERY PACK PROTECTION LI-ION BATTERY

-1

No-load speed 1st gear ...........................................................

......................0-450 min

The battery pack has overload protection that protects it

-1

No-load speed 2nd gear ..........................................................

....................0-1650 min

from being overloaded and helps to ensure long life.

Torque *1 .................................................................................

...........................52 Nm

Under extreme stress the battery electronics switch off the

Battery voltage ........................................................................

...........................18 V

machine automatically. To restart, switch the machine off

Drill opening range ..................................................................

..........................1/2 in (13 mm)

and then on again. If the machine does not start up again,

Weight with battery (Li-Ion 1.5 Ah) ..........................................

..........................2.0 kg

the battery pack may have discharged completely. In this

Weight with battery (Li-Ion 3.0 Ah) ..........................................

..........................2.2 kg

case it must be recharged in the battery charger.

Weight with battery (NiCd 2.0 Ah) ...........................................

..........................2.6 kg

INTENANCE

Use only AEG accessories and spare parts. Should

Noise/vibration information

components need to be replaced which have not been

Measured values determined according to EN 60 745.

described, please contact one of our AEG service agents

Typically, the A-weighted noise levels of the tool are:

(see our list of guarantee/service addresses).

Sound pressure level (K = 3 dB(A)) .......................................

........................78.5 dB (A)

If needed, an exploded view of the tool can be ordered.

Sound power level (K = 3 dB(A)) ............................................

........................89.5 dB (A)

Please state the Article No. as well as the machine type

Wear ear protectors!

printed on the label and order the drawing at your local

Total vibration values (vector sum in the three axes)

service agents or directly at: AEG Electric Tools,

determined according to EN 60745.

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

Vibration emission value a

h

2

Drilling into metal ..................................................................

.......................< 2.5 m/s

SYMBOLS

2

Uncertainty K= ......................................................................

..........................1.5 m/s

2

Screwing ...............................................................................

.......................< 2.5 m/s

2

Uncertainty K= ......................................................................

..........................1.5 m/s

Please read the instructions carefully before

starting the machine.

*1 Measured according to AEG norm N 877318

WARNING

Remove the battery pack before starting any

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

work on the machine.

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase

the exposure level over the total working period.

Do not dispose of electric tools together with

household waste material! In observance of

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

European Directive 2002/96/EC on waste

when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

electrical and electronic equipment and its

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

implementation in accordance with national law,

accessories, keep the hands warm, organisation of work patterns.

electric tools that have reached the end of their

life must be collected separately and returned to

an environmentally compatible recycling facility.

WARNING! Read all safety warnings and all

SPECIFIED CONDITIONS OF USE

instructions, including those given in the accompanying

The battery drill/screwdriver is designed for drilling and

brochure. Failure to follow the warnings and instructions

screwdriving for independent use away from mains supply.

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Do not use this product in any other way as stated for

normal use.

SAFETY INSTRUCTIONS

EC-DECLARATION OF CONFORMITY

Wear ear protectors. Exposure to noise can cause hearing

loss.

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

Hold power tool by insulated gripping surfaces, when

documents. EN 60745, EN 55014-1, EN 55014-2, in

performing an operation where the cutting accessory

accordance with the regulations 98/37/EC, 2004/108/EC

may contact hidden wiring. Cutting accessory contacting

a „live“ wire may make exposed metal parts of the power

tool „live“ and shock the operator.

Sawdust and splinters must not be removed while the

machine is running.

Winnenden, 2008-08-04

Rainer Kumpf

When working in walls ceiling, or floor, take care to avoid

Manager Product Development

electric cables and gas or waterpipes.

Remove the battery pack before starting any work on the

machine.

BATTERIES

Do not dispose of used battery packs in the household

New battery packs reach full loading capacity after 4 - 5

refuse or by burning them. AEG Distributors offer to retrieve

chargings and dischargings. Battery packs which have not

old batteries to protect our environment.

been used for some time should be recharged before use.

Do not store the battery pack together with metal objects

Temperatures in excess of 50°C (122°F) reduce the

(short circuit risk).

performance of the battery pack. Avoid extended exposure

Use only System GBS chargers for charging System GBS

to heat or sunshine (risk of overheating).

battery packs. Do not use battery packs from other systems.

The contacts of chargers and battery packs must be kept

Battery acid may leak from damaged batteries under

clean.

extreme load or extreme temperatures. In case of contact

with battery acid wash it off immediately with soap and

water. In case of eye contact rinse thoroughly for at least 10

minutes and immediately seek medical attention.

ENGLISH

ENGLISH