Vitek VT-1255: ENGLISH

ENGLISH: Vitek VT-1255

ENGLISH

Set the steam supply regulator (3) to the off

regulator (3) to the steam OFF position.

position.

• Remove the power plug from the outlet.

• Fill the water tank (11) till the MAX mark (13).

Open the water tank lid (2), turn over the iron

• Put the iron on the base (8).

and drain any remaining water from the water

• Insert the power plug into the outlet.

tank (11) (pic. 8).

Set the temperature regulator (10) to the

• Close the lid (2).

MAX. temperature: “•••” the (9) indicator

Set the iron vertically and allow it to cool com-

will light up (Pic.3).

pletely.

When the sole temperature (12) reaches the

Store the iron vertically in a dry coo, place out

desired temperature value, the (9) indicator

of the reach of children.

will go out, you can start cleaning of the iron

chamber.

Delivery set

Unplug the iron, set the temperature regula-

1. Iron – 1 pc.

tor (10) to the «MIN» position.

2. Water bowl – 1pc.

• Pull the plug out of the socket.

Hold the iron above the sink horizontally, set

TECHNICAL CHARACTERISTICS

and hold the regulator (3) in the SELF

Power requirements: 220V -240 V~ 50/60 Hz

CLEAN position (pic.7).

Power consumption: 1680-2000 W

Boiling water together with scale will be

throwing out from the openings in the iron

Specifications subject to change without prior

sole (12).

notice.

Slightly sway the iron back and forth, until

water goes out of the water tank (11).

Service life of appliance - 3 years

Place the iron on the base (8) and let it cool

down completely.

GUARANTEE

When the sole (12) cools down completely,

Details regarding guarantee conditions can be

wipe it with a dry cloth.

obtained from the dealer from whom the appli-

Before you take the iron for storing, make

ance was purchased. The bill of sale or receipt

sure that there is no water in the water tank

must be produced when making any claim

(11) and that the iron sole (12) is completely

under the terms of this guarantee.

dry.

This product conforms to the EMC-

CARE AND CLEANING

Requirements as laid down by the

Before cleaning the iron, make sure that it is

Council Directive 89/336/EEC

turned off and has cooled completely.

and to the Law Voltage Regulation

Wipe the iron’s outer surface with a damp

(73/23 EEC)

cloth and then wipe dry.

Sediment on the iron sole can be removed

with a cloth soaked in vinegar-water solu-

tion.

After removing sediment, polish the sole with

a dry cloth.

Do not use abrasive substances to clean the

sole and body of the iron.

Avoid touching the iron sole with sharp metal

objects.

STORAGE

Turn the temperature regulator (10) anticlock-

wise till MIN position, set the steam release

7

1255.indd 71255.indd 7 03.03.2010 15:40:1503.03.2010 15:40:15