Vitek VT-1255: ENGLISH
ENGLISH: Vitek VT-1255
ENGLISH
• When the sole temperature (12) reaches the
intensity of steaming, steam will start outgo-
desired temperature value, the (9) indicator
ing from the openings of the sole (12).
will go out, you can start ironing.
• After you finish ironing set the (10) regulator
to the “MIN” position and the steam supply
Note: While steam ironing set the tempera-
regulator (3) to the off position.
ture to steam using zone or “•••”.
• Pull the plug out of the socket and let the iron
cool down completely.
WATER SPRAYER
• You can dampen the fabric by pressing the
ATTENTION!
spray button (4) several times (pic.4).
If during the operation steam is not constantly
• Make sure that there is enough water in the
supplied, check whether the temperature regu-
water tank (11).
lator (10) is set properly and whether there is
water in the reservoir.
IRONING
• Place the iron on the base (8).
ADDITIONAL STEAM RELEASE
• Insert the power plug into the outlet.
Additional steam release function is useful
• Set the temperature regulator (10) to the re-
when ironing folds and can only be used at high
quired ironing temperature: “•”, “••”, “•••”
ironing temperatures (when the iron tempera-
(depending on the type of fabric), the (9) in-
ture regulator (10) is set to “•••”).
dicator will light up (Pic.3).
When the additional steam release button (5) is
• When the sole temperature (12) reaches the
pressed, steam will be vigorously released from
desired temperature value, the (9) indicator
the openings in the iron sole (pic.5).
will go out, you can start ironing.
• After you finish ironing set the (10) regulator
Note: In order to avoid leakage of water from
to the “MIN” position.
steam openings, press the additional steam
• Pull the plug out of the socket and let the iron
supply button (5) with 4-5 sec. interval.
cool down completely.
VERTICAL STEAMING
STEAM IRONING
For vertical steaming can be used only when
For steam ironing set the temperature regula-
the high temperature mode is used (set the
tor to steam using zone or “•••”.The iron has
temperature regulator (10) to «•••»).
an anti-drop valve, which stops water supply,
• Hold the iron vertically at the distance 15-
when the sole temperature is too low it prevents
30 cm from the clothes press the additional
the appearance of drops out of the sole open-
steam release button (5) with 4-5 seconds
ings (12). While heating or cooling down of the
interval, steam will be released from the
sole (12), you will hear clicks of opening/clos-
openings in the iron sole (12) (pic. 6).
ing of the anti-drop valve it means that the valve
works normally.
Important information
• Place the iron on the base (8).
• Vertical steaming is not recommended for
• Insert the power plug into the outlet.
synthetic fabrics.
• Make sure that there is enough water in the
• To avoid melting the fabric, do not touch the
water tank (11), the indicator (9) is not light-
iron sole to the item while steaming.
ing.
• Never steam iron clothing that is being worn
• Set the temperature regulator (10) to the re-
as the steam temperature is very high and
quired ironing temperature: to steam using
it can cause burns. Use a coat-hanger or a
zone or “•••”. (depending on the type of
stand.
fabric), the (9) indicator will light up (Pic.3).
• When the sole temperature (12) reaches the
STEAM CHAMBER CLEANING
desired temperature value, the (9) indicator
To prolong lifetime of the iron we recommend
will go out, you can start ironing.
cleaning the steam chamber, especially in the
• Turn the steam supply regulator (3) to set the
regions with “hard” water.
6
1255.indd 61255.indd 6 03.03.2010 15:40:1503.03.2010 15:40:15