Vitek VT-1253: ENGLISH
ENGLISH: Vitek VT-1253
ENGLISH
or MAX (depending on the type of fabric),
• When the sole temperature (12) reaches the
the (9) indicator will light up (Pic.3).
desired temperature value, the (9) indicator
• When the sole temperature (12) reaches the
will go out, you can start ironing.
desired temperature value, the (9) indicator
• Turn the steam supply regulator (3) to set
will go out, you can start ironing.
the intensity of steaming, steam will start
outgoing from the openings of the sole
Note:
(12).
- While steam ironing set the temperature
• After you finish ironing set the (10) regulator
to steam using zone or “•••” or MAX.
to the “MIN” position and the steam supply
regulator (3) to the off position.
WATER SPRAYER
• Pull the plug out of the socket and let the
• You can dampen the fabric by pressing the
iron cool down completely.
spray button (4) several times (pic.4).
• Make sure that there is enough water in the
ATTENTION!
water tank (11).
If during the operation steam is not constantly
supplied, check whether the temperature
IRONING
regulator (10) is set properly and whether
• Place the iron on the base (8).
there is water in the reservoir.
• Insert the power plug into the outlet.
• Set the temperature regulator (10) to the re-
ADDITIONAL STEAM RELEASE
quired ironing temperature: “•”, “••”, “•••”
Additional steam release function is use-
or MAX (depending on the type of fabric),
ful when ironing folds and can only be used
the (9) indicator will light up (Pic.3).
at high ironing temperatures (when the iron
• When the sole temperature (12) reaches the
temperature regulator (10) is set to “•••” or
desired temperature value, the (9) indicator
MAX).
will go out, you can start ironing.
When the additional steam release button (5)
• After you finish ironing set the (10) regulator
is pressed, steam will be vigorously released
to the “MIN” position.
from the openings in the iron sole (pic.5).
• Pull the plug out of the socket and let the
iron cool down completely.
Note:
- In order to avoid leakage of water from
STEAM IRONING
steam openings, press the additional
For steam ironing set the temperature regula-
steam supply button (5) with 4-5 sec.
tor to steam using zone or “•••”.
interval.
The iron has an anti-drop valve, which stops
water supply, when the sole temperature is
VERTICAL STEAMING
too low it prevents the appearance of drops
For vertical steaming can be used only when
out of the sole openings (12). While heating
the high temperature mode is used (set the
or cooling down of the sole (12), you will hear
temperature regulator (10) to “•••” or MAX).
clicks of opening/closing of the anti-drop
• Hold the iron vertically at the distance 15-
valve; it means that the valve works normally.
30 cm from the clothes press the additional
• Place the iron on the base (8).
steam release button (5) with 4-5 seconds
• Insert the power plug into the outlet.
interval, steam will be released from the
• Make sure that there is enough water in the
openings in the iron sole (12) (pic. 6).
water tank (11).
• Set the temperature regulator (10) to the
Important information
required ironing temperature: to steam us-
• Vertical steaming is not recommended for
ing zone or “•••”, the (9) indicator will light
synthetic fabrics.
up (Pic.3).
• To avoid melting the fabric, do not touch
6
1253.indd 61253.indd 6 27.05.2010 10:58:5127.05.2010 10:58:51
Оглавление
Топ 10 инструкций
100.00
Gefest 6100-0399.85
Gefest 6100-04 000199.85
Alcatel Pixi 499.75
Casio EX-H20G Silver99.72
Tp-Link TL-WA5210G99.72
Gefest 310299.67
Casio CTK-400099.64
Gefest 6100-0299.63
Casio EX-Z1050 Silver