Pioneer PD-50-K: Playback

Playback 04

English

Chapter 4:

Repeat playback

Programmed playback (Play tracks in a

Repeat play can be performed for the currently playing

predetermined order)

single track, or for all tracks on the entire disc.

Playback

This function allows you to program up to 24 tracks for

• During playback, press the

playback in the order selected.

The functions that can be used differ according to the

REPEAT button.

type of disc and file. In some cases, some of the

Note

1 From the stop mode, press the

• Repeat play will begin, and the [REPEAT]

functions cannot be used. See Playback functions on

• If the power cord is disconnected when the unit is

PROGRAM

button.

indicator will light on the unit’s front panel display.

page 13.

in the standby mode the unit will turn off, but when

Press the button again to alternate the type of

The [PGM] indicator will light in the unit’s front panel

the cord is then reconnected, the unit will not

repeat play between single-track repeat and disc

display.

automatically turn on. After reconnecting the

(all-track) repeat as follows:

power cord, press the remote control’s

2 Use the number buttons to

Playing discs

 STANDBY/ON button to turn the power on.

select the number of the desired

トラックリピート([REPEAT]点灯)

track, followed by the

ENTER

1 Press the front panel’s

Fast forward/Fast reverse

↓

button.

DeutschFrançais

/I STANDBY/ON

button to turn

ディスクリピート([REPEAT]、[ALL]点灯)

Example: To select track 15, press the 1 and 5 buttons,

power ON to the unit.

• During playback, press the



↓

then press ENTER. In the event you make a mistake,

• Turn on the power by pressing the

or



button.

リピートオフ

press the CLEAR button.

/I STANDBY/ON button so that it

Each time the button is pressed the forward or reverse

remains at the depressed position.

speed is changed in four steps.

3 Repeat step 2 to input the numbers of all

Note

Side view of front panel

• To return to the normal play function, press the

desired tracks.

 button.

• The repeat play function is canceled when disc

2 Press the



button to open

playback is stopped.

4 Press the



button.

Italiano Español Русский

the disc tray and set the disc in

Playback will begin in the order the tracks have

Skip function

place.

been programmed. If you wish to add other

Random playback

• Set the disc with the imprinted side facing up.

tracks, repeat steps 1 and 2.

• During playback, press the



All tracks on the disc are selected and played in random

3 Press the



button to begin

or



button.

order, until each track has been played once.

Note

playback.

Playback will skip ahead or backwards the number of

• To pause playback, press the  button.

tracks corresponding to the times the button is pressed.

• During playback, press the

•If the CLEAR button is pressed when the disc is

RANDOM

button.

stopped, all programmed tracks will be cancelled.

• To stop playback, press the  button.

Nederlands

Direct search (designate a specific track

Random playback starts, and the [RANDOM]

• To clear programmed tracks, from the stop mode,

lights in the main unit's front panel display.

press the PROGRAM button followed by the CLEAR

Note

for playback)

button. The programmed tracks will be cancelled,

• Steps 2 and 3 can be performed via the remote

Note

beginning with the last one programmed.

• Using the number buttons,

control in the same way as for the main unit’s front

• A “pause” cannot be programmed.

input the desired track number,

• Random playback continues until the disc stops, or

panel controls.

• The contents of programmed playback (all-track

then press the ENTER button to

until the RANDOM button is pressed once again.

repeat) can be repeated. Just press the REPEAT

• The random playback function cannot be used

Set the power to Standby

confirm the selection.

button after beginning programmed playback (see

simultaneously with programmed playback.

Even if the ENTER button is not pressed,

at left).

Remove any disc loaded before setting the power switch

playback will begin automatically after a 5-second

•If the  button is pressed during random

• Single-track repeat cannot be performed during

to STANDBY mode.

interval (this does not apply to programmed playback).

playback, play skips ahead to the next randomly

programmed playback.

selected track. If the  button is pressed,

• Press the remote control’s

• Random playback cannot be used during

playback returns to the beginning of the currently

 STANDBY/ON

button.

programmed playback.

playing track and starts again.

The next time you wish to turn on the power,

•If the  button is pressed during programmed

press the remote control’s  STANDBY/ON button.

playback, play will jump ahead to begin playback of

the next programmed track.

• Pressing the front panel /I STANDBY/ON button

• After playback has stopped, to begin the same

sets the unit to power OFF, not STANDBY mode. To

programmed playback again, press the PROGRAM

turn on the power again, press the front panel’s

button, followed by the  button.

/I STANDBY/ON button.

9

En

0 9

〜

REPEAT

PROGRAM

0 9

〜

RANDOM

PD-50_PWSYXZT8.book 9 ページ ２０１２年７月６日　金曜日　午前１１時１２分