Pioneer DDJ-ERGO-V: Operation

Operation

The screen above shows an example of 2-deck layout. The contents displayed on the screen differ according to the VIRTUAL DJ LE settings.

! The deck layout can be switched by clicking the [

] button on the computer’s screen.

Loading tracks and playing them

Outputting sound

The following example describes the procedure for playing tracks with a

Set the volume of the power amplifiers connected to the [MASTER OUT

2-deck layout.

1] and [MASTER OUT 2] terminals to an appropriate level. Note that if

the volume is set too high, the output sound could be very loud.

1 Turn the rotary selector while pressing the [SHIFT]

button to select a folder or item.

1 Operate the [GAIN] control and the channel faders to

! When a folder or item with the [+] mark is selected and the rotary

adjust the audio level output from the respective decks.

selector is pressed while pressing the [SHIFT] button, that folder or

item is opened or closed.

2 Operate the crossfader to switch the deck whose

sound is output from the speakers.

2 Release the [SHIFT] button then turn the rotary

— Left edge: Sound is output from deck [A] or [C].

selector to select the track.

— Center: The sound of all the decks is mixed and output.

— Right edge: Sound is output from deck [B] or [D].

3 Press the [LOAD] button to load the selected track

onto the deck.

3 Turn the [MASTER VOL] control to adjust the audio

level of the speakers.

4 Press the [f] button to play the track.

! When this button is pressed again during playback, playback

pauses.

Quitting the system

1 Quit VIRTUAL DJ LE.

2 Slide this unit’s [ON/OFF] switch to the [OFF] position.

3 Disconnect the USB cable from your computer.

4 Turn off the connected microphone and external

equipment.

6

En