AEG PW 5571 FA 520571 Серебристый, черный: English

English: AEG PW 5571 FA 520571 Серебристый, черный

38

English

The default symbol for the “unathletic“ type ashes.

Use

Which type do you consider yourself to be? Select your

The device has a very sensitive sensor. If you want to adjust

type using the UP or DOWN button: “unathletic“, “aver-

the settings, simply touch the buttons gently with your finger.

age“ or “athletic“. Confirm your selection with SET.

If the device does not respond to touch, clean the glass

If only the stored position and the display 0.0 kg

surface with a soft, dry cloth.

(0.0 lb/0:0 st) is still shown, input mode for this stored

position is completed.

NOTE:

The scales are factory set with the units “kg“ and “cm“.

You now have the following options:

You can change the units for weight and type. Press the

To change the settings to “lb“ or “st“ as well as “Ft:in“,

UP button

, until the desired unit of weight is displayed.

proceed as follows:

The unit for the height automatically changes.

Switch the scales on by applying gentle pressure on the

Press the SET button to see the selected settings again.

glass surface with your foot or toe.

Allocate further memory spaces. There are 10 spaces

Press the UP button

, until the required unit of weight

avail-able in total. Press SET and change the space by

is displayed. The unit for the height also automatically

pressing the UP or DOWN button. Proceed further as

changes.

described above.

If you want to make changes, press SET (USER ashes).

Weighing Function

Select the stored position using the UP or DOWN but-

Place the scale on a hard, at surface (avoid carpets). An

ton. Proceed further as described above.

uneven floor contributes to inaccurate measurements.

You can immediately start measuring.

Stand on the scales with both feet. The device switches

on automatically.

Measurement and Analysis

Distribute your weight equally and wait for the scale to

Record your personal data in the memory.

determine your weight.

The digits on the display will ash before your exact

NOTE:

weight will be shown.

The device can only function correctly if you stand on

In order to extend the battery life, the device will auto-

the device with bare, dry feet!

matically turn off 10 seconds after you have stepped off

If necessary wipe the contact surfaces to improve

the scale.

results.

Due to the signicant uctuation of body fat, it is

Saving Personal Data

difficult to attain a standard value. On average the

optimal testing time is between 6 p.m. and 8 p.m, since

NOTE:

the body fat remains very consistent during this period

The scale has default values that you can change, as

of time.

described below.

Press the SET button. The preset stored position data ap-

Carry out the following steps in sequence and within a

pears on the display (USER flashes). Use the UP / DOWN

few seconds. Otherwise, the device will automatically

button to select the stored position at which your data is

cancel input mode.

saved.

Press the button SET. The memory space will ash on the

Wait for the USER display and 0. 0 kg (0.0 lb/st) to stop

display (USER). Confirm the setting by pressing SET or se-

flashing.

lect another memory space by pressing the UP / DOWN

Stand on the contact surfaces (1) of the scales with both

button. Then press SET to go to the next setting.

feet.

The symbol for “male” or “female” will ash. Conrm the

Firstly your weight will ash on the display.

setting by pressing SET or use the UP / DOWN button to

After a few seconds, the following results will be shown:

choose the symbol for your gender. Then press SET to go

1. - the body fat content in % (

symbol)

to the next setting.

- the body water content in % (

symbol)

The height setting will ash. Select your height by press-

- the results analysis in the form of a bar

ing UP or DOWN button. Holding down one of the

2. - the muscle mass content in % (

symbol)

buttons will accelerate the process. Confirm your entry by

- the bone mass content in % (

symbol)

pressing SET.

- the calorie requirement per day

The setting AGE will ash. Select your age by pressing UP

3. - The preset gender

or DOWN button. Holding down one of the buttons will

- The preset type

ac-celerate the process. Confirm your entry by pressing

- The preset height

SET.

- The preset age (AGE)