AEG BS 14G NC-142C 416790: English

English: AEG BS 14G NC-142C 416790

TECHNICAL DATA

Cordless drill Cordless impact drill

BS 12G BS 14G BSB 12G BSB 14G

Drilling capacity in steel ..........................................................

........10 mm ..............10 mm................10 mm ...................10 mm

Drilling capacity in wood .........................................................

........30 mm ..............32 mm................30 mm ...................32 mm

Drilling capacity in brick and tile .............................................

............ - ....................... - ......................6 mm .....................8 mm

Wood screws (without pre-drilling) ..........................................

.......4,2 mm .............4,2 mm...............4,2 mm ..................4,2 mm

No-load speed 1st gear ..........................................................

...0-350 /min ....... 0-400 /min ..........0-350 /min .............0-400 /min

No-load speed 2nd gear .........................................................

.0-1350 /min ..... 0-1400 /min ........0-1350 /min ...........0-1400 /min

Rate of percussion under load max. .......................................

............ - ....................... - ..............20

250 /min ............21

000 /min

Torque .....................................................................................

........30 Nm ...............32 Nm ................ 30 Nm ...................32 Nm

Battery voltage ........................................................................

........12 V ...............14,4 V ................... 12 V ...................14,4 V

Drill opening range

.....1-10 mm .......... 1-10 mm.............1-10 mm ................1-10 mm

.................................................................

Weight with battery (1.4 Ah)

.....1,65 kg ..............1,95 kg .................1,8 kg ....................2,1 kg

...................................................

Noise/vibration information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A))

........90 dB(A) ...........90 dB(A) ............. 90 dB(A) ................90 dB(A)

..........................................

Sound power level (K = 3 dB(A)) ..............................................

......101 dB(A) .........101 dB(A) ........... 101 dB(A) ..............101 dB(A)

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined according to EN 60745.

Vibration emission value a

h

GB

2

2

Percussion drilling into concrete ...............................................

............ - ....................... - .................15,6 m/s

...............13,7 m/s

2

2

Uncertainty K= .........................................................................

............ - ....................... - ...................1,5 m/s

.................1,5 m/s

2

2

2

2

Drilling into metal ......................................................................

...< 2,5 m/s

...... < 2,5 m/s

.........< 2,5 m/s

.............< 2,5 m/s

2

2

2

2

Uncertainty K= .........................................................................

.......1,5 m/s

............1,5 m/s

.............1,5 m/s

.................1,5 m/s

2

2

2

2

Screwing ..................................................................................

...< 2,5 m/s

....... < 2,5 m/s

.........< 2,5 m/s

.............< 2,5 m/s

2

2

2

2

Uncertainty K= .........................................................................

.......1,5 m/s

............1,5 m/s

.............1,5 m/s

.................1,5 m/s

*1 Measured according to AEG norm N 877318

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with

different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running

but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

WARNING!

Do not dispose of used battery packs in the household refuse or

Read all safety warnings and all instructions, including those

by burning them. AEG Distributors offer to retrieve old batteries to

given in the accompanying brochure. Failure to follow the warnings

protect our environment.

and instructions may result in electric shock, fire and/or serious

Do not store the battery pack together with metal objects (short

injury. Save all warnings and instructions for future reference.

circuit risk).

Use only System GBS chargers for charging System GBS battery

SAFETY INSTRUCTIONS

packs. Do not use battery packs from other systems.

Wear ear protectors. Exposure to noise can cause hearing loss.

No metal parts must be allowed to enter the battery section of the

Hold power tool by insulated gripping surfaces, when performing

charger (short circuit risk).

an operation where the fastener may contact hidden wiring.

Never break open battery packs and chargers and store only in dry

Fasteners contacting a “live” wire may make exposed metal parts of

rooms. Keep dry at all times.

the power tool “live” and could give the operator an electric shock.

Battery acid may leak from damaged batteries under extreme load

Always wear goggles when using the machine. It is recommended to

or extreme temperatures. In case of contact with battery acid wash

wear gloves, sturdy non slipping shoes and apron.

it off immediately with soap and water. In case of eye contact rinse

Sawdust and splinters must not be removed while the machine is

thoroughly for at least 10 minutes and immediately seek medical

running.

attention.

When working in walls ceiling, or floor, take care to avoid electric

The dust produced when using this tool may be harmful to health.

cables and gas or waterpipes.

Do not inhale the dust. Wear a suitable dust protection mask.

Remove the battery pack before starting any work on the machine.

English

10

SPECIFIED CONDITIONS OF USE

BS 12G, BS 14G: The Cordless drill is designed for drilling and

screwdriving for independent use away from mains supply.

BSB 12G, BSB 14G: The Cordless impact drill is designed for drilling,

percussion drilling, as well as screwdriving for independent use

away from mains supply.

Do not use this product in any other way as stated for normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in

conformity with the following standards or standardized documents.

EN 60745, EN 55014-1, EN 55014-2, in accordance with the

regulations 2006/42/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Winnenden, 2010-01-19

Authorized to compile the technical file

BATTERIES

New battery packs reach full loading capacity after 4 - 5 chargings

GB

and dischargings. Battery packs which have not been used for some

time should be recharged before use.

Temperatures in excess of 50°C (122°F) reduce the performance of

the battery pack. Avoid extended exposure to heat or sunshine (risk

of overheating).

The contacts of chargers and battery packs must be kept clean.

ADVICE FOR OPERATION

The gears can be only changed when the machine is switched off

MAINTENANCE

Use only AEG accessories and spare parts. Should components

need to be replaced which have not been described, please contact

one of our AEG service agents (see our list of guarantee/service

addresses). If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type printed

on the label and order the drawing at your local service agents or

directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10,

D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before

starting the machine.

Accessory - Not included in standard equipment,

available as an accessory.

Remove the battery pack before starting any work on

the machine.

Do not dispose of electric tools together with household

waste material! In observance of European Directive

2002/96/EC on waste electrical and electronic

equipment and its implementation in accordance with

national law, electric tools that have reached the end of

their life must be collected separately and returned to an

environmentally compatible recycling facility.

English

11