AEG BS 14C Li-152C 428425: 14 15 ENGLISH ENGLISH

TECHNICAL DATA Drill/Screwdriver

BS 14 C

BS 14 C

BATTERIES

-1

-1

No-load speed 1st gear ...........................................................

...0-350 min

...0-350 min

New battery packs reach full loading capacity after 4 - 5

-1

-1

No-load speed 2nd gear ..........................................................

.0-1300 min

.0-1300 min

chargings and dischargings. Battery packs which have not

Torque *1 .................................................................................

........45 Nm

........45 Nm

been used for some time should be recharged before use.

Battery voltage.........................................................................

.....14.4 V

.....14,4 V

Temperatures in excess of 50°C (122°F) reduce the

Drill opening range ..................................................................

.......1/2 in (13 mm)

.......1/2 in (13 mm)

performance of the battery pack. Avoid extended exposure

Weight with battery (Li-Ion 1.5 Ah) ..........................................

.......1.9 kg

.......1,9 kg

to heat or sunshine (risk of overheating).

Weight with battery (Li-Ion 3.0 Ah) ..........................................

.......2.1 kg

.......2,1 kg

The contacts of chargers and battery packs must be kept

Weight with battery (NiCd 2.0 Ah) ...........................................

.......2.3 kg

.......2,3 kg

clean.

BATTERY PACK PROTECTION LI-ION BATTERY

Noise/vibration information

The battery pack has overload protection that protects it

Measured values determined according to EN 60 745.

from being overloaded and helps to ensure long life.

Typically, the A-weighted noise levels of the tool are:

Under extreme stress the battery electronics switch off the

Sound pressure level (K = 3 dB(A)) .......................................

.....78,5 dB (A)

.....78.5 dB (A)

machine automatically. To restart, switch the machine off

Sound power level (K = 3 dB(A)) ............................................

.....89.5 dB (A)

.....89,5 dB (A)

and then on again. If the machine does not start up again,

Wear ear protectors!

the battery pack may have discharged completely. In this

Total vibration values (vector sum in the three axes)

case it must be recharged in the battery charger.

determined according to EN 60745.

Vibration emission value a

h

INTENANCE

2

2

Drilling into metal ..................................................................

....< 2.5 m/s

....< 2,5 m/s

2

2

Uncertainty K= ......................................................................

.......1.5 m/s

.......1,5 m/s

Use only AEG accessories and spare parts. Should

2

2

Screwing ...............................................................................

....< 2,5 m/s

....< 2.5 m/s

components need to be replaced which have not been

2

2

Uncertainty K= ......................................................................

.......1.5 m/s

.......1,5 m/s

described, please contact one of our AEG service agents

(see our list of guarantee/service addresses).

*1 Measured according to AEG norm N 877318

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

WARNING

service agents or directly at: AEG Electric Tools,

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

SYMBOLS

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

the exposure level over the total working period.

Please read the instructions carefully before

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

starting the machine.

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

Remove the battery pack before starting any

work on the machine.

WARNING! Read all safety warnings and all

water. In case of eye contact rinse thoroughly for at least 10

instructions, including those given in the accompanying

minutes and immediately seek medical attention.

brochure. Failure to follow the warnings and instructions

Do not dispose of electric tools together with

may result in electric shock, re and/or serious injury.

SPECIFIED CONDITIONS OF USE

household waste material! In observance of

Save all warnings and instructions for future reference.

The battery drill/screwdriver is designed for drilling and

European Directive 2002/96/EC on waste

screwdriving for independent use away from mains supply.

electrical and electronic equipment and its

SAFETY INSTRUCTIONS

implementation in accordance with national law,

Do not use this product in any other way as stated for

Wear ear protectors. Exposure to noise can cause hearing

electric tools that have reached the end of their

normal use.

loss.

life must be collected separately and returned to

an environmentally compatible recycling facility.

Hold power tool by insulated gripping surfaces, when

EC-DECLARATION OF CONFORMITY

performing an operation where the cutting accessory

We declare under our sole responsibility that this product is

may contact hidden wiring. Cutting accessory contacting

in conformity with the following standards or standardized

a „live“ wire may make exposed metal parts of the power

documents. EN 60745, EN 55014-1, EN 55014-2, in

tool „live“ and shock the operator.

accordance with the regulations 2006/42/EC, 2004/108/EC

Sawdust and splinters must not be removed while the

machine is running.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

Winnenden, 2010-03-15

Remove the battery pack before starting any work on the

machine.

Do not dispose of used battery packs in the household

refuse or by burning them. AEG Distributors offer to retrieve

Rainer Kumpf

old batteries to protect our environment.

Manager Product Development

Do not store the battery pack together with metal objects

Authorized to compile the technical le

(short circuit risk).

Use only batteries L1430R, B1420R, B1415R and L1414R

of the system GBS. Charge these batteries only with

chargers of the system GBS. Do not use batteries from

other systems.

Battery acid may leak from damaged batteries under

extreme load or extreme temperatures. In case of contact

with battery acid wash it off immediately with soap and

14 15

ENGLISH

ENGLISH