AEG BE 705R: English

TECHNICAL DATA

BE 705 R

Power screwdriver

Production code 4165 06 01...

... 000001-999999

Rated input 705 W

Output 566 W

-1

No-load speed 2700 min

-1

Speed under load max. 1820 min

Static jamming moment * 15 Nm

Drilling capacity in steel 10 mm

Drilling capacity in Aluminium 16 mm

Drilling capacity in wood 30 mm

Drill chuck range 1-10 mm

Drive shank 1/2 ˝

Weight according EPTA-Procedure 01/2003 1,6 kg

Noise/Vibration Information

GB

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K=3dB(A))

85 dB(A)

Sound power level (K=3dB(A))

96 dB(A)

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined according to EN 60745.

Drilling into metal:

2

Vibration emission value a

<2,5 m/s

h

2

Uncertainty K=

1,5 m/s

Screwing:

2

Vibration emission value a

<2,5 m/s

h

2

Uncertainty K=

1,5 m/s

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and

may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications, with

dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running

but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Hold power tool by insulated gripping surfaces, when

WARNING! Read all safety warnings and all instructions,

performing an operation where the cutting accessory may

including those given in the accompanying brochure. Failure

contact hidden wiring or its own cord. Cutting accessory

to follow the warnings and instructions may result in electric shock,

contacting a „live“ wire may make exposed metal parts of the power

re and/or serious injury.

tool „live“ and could give the operator an electric shock.

Save all warnings and instructions for future reference.

Hold power tool by insulated gripping surfaces, when perfor-

SAFETY INSTRUCTIONS

ming an operation where the fastener may contact hidden

wiring or its own cord. Fasteners contacting a „live“ wire may

Wear ear protectors. Exposure to noise can cause hearing loss.

make exposed metal parts of the power tool „live“ and could give the

Use auxiliary handle(s), if supplied with the tool. Loss of

operator an electric shock.

control can cause personal injury.

English

6

Appliances used at many dierent locations including open air should

MAINTENANCE

be connected via a residual current device (FI, RCD, PRCD) of 30mA

or less.

The ventilation slots of the machine must be kept clear at all times.

Use protective equipment. Always wear safety glasses when working

It is recommended to regularly use cleaner for the clamping jaws and

with the machine. The use of protective clothing is recommended,

the clamping jaw borings.

such as dust mask, protective gloves, sturdy non-slip footwear,

Use only AEG accessories and spare parts. Should components need to

helmet and ear defenders.

be replaced which have not been described, please contact one of our

Sawdust and splinters must not be removed while the machine is

AEG service agents (see our list of guarantee/service addresses).

running.

If needed, an exploded view of the tool can be ordered. Please state

Before doing any work on the machine, pull the plug out of the

the machine type printed as well as the six-digit No. on the label

socket.

and order the drawing at your local service agents or directly at:

Techtronic Industries GmbH, Max-Eyth-Straße10, 71364Winnenden,

Only plug-in when machine is switched o.

Germany.

Keep mains lead clear from working range of the machine. Always

lead the cable away behind you.

SYMBOLS

When working in walls ceiling, or oor, take care to avoid electric

cables and gas or waterpipes.

Please read the instructions carefully before starting

the machine.

The dust produced when using this tool may be harmful to health. Do

not inhale the dust. Wear a suitable dust protection mask.

SPECIFIED CONDITIONS OF USE

CAUTION! WARNING! DANGER!

GB

The drill/screwdriver can be universally used for drilling, and

Always disconnect the plug from the socket before

screwdriving.

carrying out any work on the machine.

Do not use this product in any other way as stated for normal use.

Accessory - Not included in standard equipment,

ECDECLARATION OF CONFORMITY

available as an accessory.

We declare under our sole responsibility that the product described

Do not dispose of electric tools together with

under “Technical Data” fullls all the relevant regulations and the

household waste material! In observance of European

directives 2011/65/EU (RoHs), 2004/108/ EC, 2006/42/EC and the

Directive 2002/96/EC on waste electrical and electronic

following harmonized standards have been used:

equipment and its implementation in accordance with

EN 60745-1:2009 + A11:2010

national law, electric tools that have reached the end

EN 60745-2-1:2010

of their life must be collected separately and returned

EN 60745-2-2:2010

to an environmentally compatible recycling facility.

EN 55014-1:2006 + A1:2009 + A2:2011

Class II construction, tool in which protection against

EN 55014-2:1997 + A1:2001 + A2:2008

electric shock does not rely on basic insulation only,

EN 61000-3-2:2006 + A1:2009 + A2:2009

but in which additional safety precautions, such

EN 61000-3-3:2008

as double insulation or reinforced insulation, are

provided.

Winnenden, 2013-06-13

Alexander Krug / Managing Director

Authorized to compile the technical le

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

MAINS CONNECTION

Connect only to single-phase AC current and only to the system

voltage indicated on the rating plate. It is also possible to connect

to sockets without an earthing contact as the design conforms to

safety class II.

English

7