Vitek VT-1662: ENGLISH

ENGLISH: Vitek VT-1662

ENGLISH

• Leave at least 7-8 cm of space behind

Setting cooking time and power level

and on the sides of the oven and 30 cm

For example you need to set the cooking

of space above the oven.

time of 5 minutes at 60% power level:

Do not remove the supporting legs

1. Press the “microwaves” button, the in-

from the bottom of the microwave

dication (25) will light up.

oven.

2. Set the operating time by pressing the

Do not block the ventilation openings on

“1 minutes” button five times.

the body of the microwave oven.

3. Set the required power, by pressing the

Place the unit away from the television

power” button three times.

and radio receivers to avoid interferences

4. Press the “start” button, the indication

while receipt of tele – and radio signals.

(35) will light up.

NOTE: Never place the microwave oven

Note: while setting 100% power level the

on the surface with heating (stove) and

third step is not necessary.

other heated sources.

During cooking the indication (35) will light

If the microwave oven is broken due to the

up on the display and countdown of the

fault of the owner, it loses the right for free

remaining cooking time starts. After the

warranty service and repair.

cooking time is over, the unit will switch off

During the operation the surface of the

– three sound signals will be heard. If you

microwave oven can heat up strongly,

have forgot to take the products out of the

avoid contact with heated surface of

unit, then in two minutes the repeated three

the oven, in order to avoid getting of

sound signals will remind you about it.

burns.

Start cooking time setting

OPERATION

You want to start cooking at 2:00 o’clock

Sound signal

(АМ orРМ):

Pressing buttons on the control panel you

1. Press the “preset” button, the indica-

will hear sound signals.

tion (28) will light up.

2. Set the time to start cooking, by press-

Setting current time

ing the “1 minutes” button twice.

For example you need to set the current

3. Set the required cooking mode.

time “6:00” (АМ or РМ):

4. Press the “start” button, the indication

1. Insert the plug into the socket.

(28) will be flashing.

2. Press the “clock” button.

3. Press the “stop” button.

Note: make sure that the current time is

4. Press the “1 minutes” button to set

set properly.

hours six times.

When the preset time 2:00 is reached

5. Press the “clock” button to confirm the

cooking process will start. During cooking

preset time, the dots (33) will be flashing

the remaining cooking time and the cor-

on the display.

responding operating mode indication are

displayed. After the cooking time is over,

Note: In this model a 12-hour time mode

the unit will switch off – three sound signals

is used. To display the current time during

will be heard. If you have forgot to take the

the operation of the unit, press the “clock”

products out of the unit, then in two min-

button.

utes the repeated three sound signals will

remind you about it.

7

1662.indd 71662.indd 7 24.06.2008 12:47:4624.06.2008 12:47:46