Vitek VT-1510 SR: ENGLISH

ENGLISH

• Unplug power cord from wall outlet and wait until coffee machine is cooled down com-

pletely.

• Install percolator-filer (b) to its place, and tighten fastening screw (a) by screwdriver

rotating it anticlockwise.

CLEANING

Wipe the body of the coffee maker with a damp soft cloth. Do not use abrasives and metal

sponges.

Do not immerse the body of the coffee maker into water or other liquids

Wash the removable parts of the coffee maker in warm water with a soft detergent, rinse

and dry.

Water tray (1)

• Remove the grid (2) from the tray (1), remove the tray (1) from the base and pour water

from the tray (1) set the tray (1) on its place, set the grid (2) on the tray (1). If necessary

you can wash the tray (1) and the grid (2) in warm water with a soft detergent, rinse and

dry.

PROBLEMS, THEIR CAUSES AND SOLUTIONS:

Problem Cause Solution

Heat the accessories preliminary

Cups, and the filter holder (3) were

(Cups and the filter holder). See

“Espresso”

cold.

the “Making espresso” chapter

Is not hot enough

The filter holder (3) is set improp-

See the “Making espresso” chap-

erly and not until bumping.

ter

Coffee grouts on the sides of the

Clean the filter sides.

filter.

Coffee leakage

Apply to the authorized service

from the filter holder

The gasket (3) is damaged.

center.

(3)

No water in the water tank (9). Fill the water tank (9) with water.

The water tank (9) is set improp-

Press on the tank (9) above to set

erly.

it on its place.

Ground coffee is too dry, and the

When water supply

pump can not produce necessary

Use freshly ground coffee.

is switched on, the

pressure

pump produces

No water in the water tank (9). Fill the water tank (9) with water.

noise

The water tank (9) is set improp-

Press on the tank (9) above to set

erly.

it on its place.

9

1510.indd 91510.indd 9 02.04.2008 15:43:5902.04.2008 15:43:59