Vitek VT-1510 SR: ENGLISH

ENGLISH

• Set the required temperature for mak-

- Switch coffee machine on using button

ing coffee by pressing the (18) button,

(14).

the (24) indications will appear on the

- Depending on the type of used coffee,

display (6). One indication corresponds

put coffee in pods or grinded coffee into

to the low temperature; three indications

filter holder (3) using measuring spoon

correspond to the maximal temperature

(33), ram grinded coffee down a little to

(24).

the sealer (4).

• Depending on the coffee using type, put

- Set filter holder (3) to its place and turn it

coffee in pods in the filter holder (3) or

to right up to stop (picture 3).

put ground coffee using the measuring

- Put one or two cups under filter holder

spoon (33), slightly tamp ground cof-

(3) depending on preset type of making

fee against the sealer (4). Heat the filter

coffee (picture 4).

holder (3) before using, by placing it on

the cup support base (7).

Programming

• Set the filter holder (3) on its place and

• Press button (17) and select mode P1 or

turn it to the right until bumping (pic.3).

P2. Selected function will be indicated on

• Put one or two heated cups according to

display (6) by symbol (28).

the coffee using variant under the filter

• Press and hold buttons (15) and (18) si-

holder, and press coffee making button

multaneously for 3 seconds. Symbol P1

(16). After you have made coffee, two

or P2 (28) will be blinking on display (6).

sound signals will be heard (pic.4).

• Select one or two cups of coffee (sym-

• After you have made coffee, remove the

bols (27) and (30) on display) using but-

filter holder (3), by turning it to the left

ton (15).

(pic.3). Remove the remaining coffee

• Press and hold for 3 seconds button (15),

(pic.8) and wash the filter holder (3) un-

select variant of using coffee in pods or

der tapping water.

grinded coffee (symbols (21) and (22) on

Note: at the end of coffee making proc-

display (6)).

ess you will hear sound of outputting

• Select temperature mode for making cof-

steam, it is normal.

fee by pressing button (18). Temperature

- Check water tray filling indication (13),

values are displayed as symbols (24) on

when it appears in the hole of the grid

display (6). One symbol indicates low

(2), remove the grid (2) from the tray (1),

temperature; three symbols indicate

remove the tray (1) from the base and

maximal temperature (24).

pour out water from the tray (1), set the

• Press and hold button (16). When you get

tray (1) on its place, set the grid (2) on

necessary amount of coffee, release the

the tray (1).

button (16).

• After symbols P1 or P2 (28) stop blinking

Individual programming

on display (6), the modes will be memo-

You can program two modes of preparing

rized.

coffee on your own taste taking into ac-

• Switch coffee machine off by pressing

count temperature mode, making one or

button (14), remove filter holder (3) by

two cups of coffee simultaneously, using

rotating it to the left (picture 3). Remove

grinded coffee or coffee in pods, and also

coffee remnants (picture 8) and wash the

depending on volume of coffee to be made.

holder under water jet.

In order to save modes of preparation, it is

necessary to make coffee one time:

6

1510.indd 61510.indd 6 02.04.2008 15:43:5902.04.2008 15:43:59