Vitek VT-1510 SR: ENGLISH

ENGLISH

Attention! Water is hot. Be careful.

• Prepare citric acid solution: 2 teaspoons

Note:

of citric acid and 1 liter of water and pour

- During water boiling the pump switches

this solution in the water tank (9). Set the

on periodically, it is normal.

tank (9) on its place.

- To switch to the “ESPRESSO” mode from

• Select a corresponding bowl with capac-

the “CAPPUCCINO” mode or the “WATER

ity not less than 0,6 l and put it on the wa-

BOILING” mode, press the On/Off (14)

ter tray grid (2) (1). Place the bowl in a

button once.

way that the cappuccinator tube (12) is in

the bowl.

AUTO-OFF button

• Insert the plug into the socket and press

If you have not been using the coffee mak-

the On/Off (14) button to switch on the

er for 1 hour, it will switch off automatical-

coffee maker.

ly. You can switch on the coffee maker by

• Wait until the coffee maker warms up, the

pressing the On/Off (14) button.

(29) indication will disappear.

• Press the (17), (19) buttons simultane-

SCALE REMOVAL

ously, the pump will switch on and water

When you see the flashing (25) indication

supply will start, the scale removal (26)

on the display (6) you should perform scale

indication will be lighting, the heating el-

removal in the heating element of the cof-

ement will switch on as well and the (29)

fee maker using citric acid. While scale

indication will light up.

removal, make sure not to damage the

• To wash the cappuccinator tube (12) sup-

tabletop with acids, be especially careful

ply steam, by turning the steam supply

if the tabletop is made of marble or stone.

handle (10) anti clockwise until bumping

Put a tissue, a dry cloth under the coffee

for 8-10 sec. Stop steam supply, by turn-

maker or place the coffee maker in the cor-

ing the steam supply handle (10) clock-

responding tray.

wise until bumping.

Note: The appearance of the (25) indica-

• When about 0,5 l of water passes, the

tion on the display (6) depends on water

pump will switch off and the coffee mak-

hardness in your region and is about:

er will switch to the standby mode.

- HI-high water hardness – 30 liters

• Detach installed container, at that sound

- MI- medium water hardness - 45 liters

signal is heard, and symbol (23) starts

- LO- low water hardness - 60 liters

blinking on display (6), pour water out of

container and put it again on the grill (2)

When you see the flashing (25) indication

of water tray (1). Install the container thus

on the display (6), perform scale removal.

the cappuccinator-pipe (12) is inside it.

• Unplug the coffee maker and wait until it

• Detach and clean water reservoir (9), fill it

cools down completely.

with water up to maximal mark and install

• Turn the filter holder to the left and re-

it to the former place.

move it.

• Pump is on, and cleaning mode is start-

• Use a corresponding cross screwdriver

ed. In order to clean cappuccinator-pipe

to remove the mounting screw (a), by

(12), open steam supply by turning team

turning it clockwise, and remove the filter

supply handle (10) clockwise up to stop

– strainer (b) (pic.9).

for 2-3 seconds.

• When there is scale deposit on the filter

• After completion of cleaning mode, cof-

(b), put the filter in citric acid solution,

fee machine is switched off automati-

and then wash it.

cally.

8

1510.indd 81510.indd 8 02.04.2008 15:43:5902.04.2008 15:43:59