Vitek VT-1510 SR: ENGLISH

ENGLISH

Using programmed operating modes

appropriate container (mind that either

- Switch coffee machine on using button

container, milk or creams should be very

(14).

well cooled).

- Depending on the type of used coffee,

• Put container with milk or creams under

put coffee in pods or grinded coffee into

cappuccinator-pipe (12) and open steam

filter holder (3) using measuring spoon

supply by rotating steam supply handle

(33), ram grinded coffee down a little to

(10) anticlockwise up to stop (picture 7).

the sealer (4)

• After required amount of foam is reached,

- Set filter holder (3) to its place and turn it

rotate steam supply regulator handle (10)

to right up to the stop (picture 3).

clockwise up to stop.

- Put one or two cups under filter holder

• In order to avoid obstruction of cappucci-

(3) depending on the preset type of mak-

nator-pipe (12), put appropriate contain-

ing coffee (picture 4).

er with some water inside under the pipe

- Select one or preprogrammed operating

(12) and open steam supply for several

modes (P1 or P2) using button (17).

seconds by turning steam supply handle

- Press button (16).

(10) anticlockwise up to stop, afterwards

- On completion of work, witch coffee ma-

lock steam supply by turning handle (1)

chine off by pressing button (14), detach

clockwise up to stop.

filter holder (3) by rotating it to the left

Attention! Be aware of burns by hot

(picture 3). Remove coffee remnants

steam.

(picture 8) and wash the holder under

Notice: During the process of steam

water jet.

generation, flips or clicks are heard.

These flips appearance is result of peri-

Preparing “Cappuccino”

odical turning the pump on, this is nor-

You can whip up creams or milk for mak-

mal.

ing “cappuccino” coffee or warm up other

beverages by hot steam using this coffee

Boiling water

machine.

You can warm some water for making tea

• Fill reservoir (9) with cold water up to

using this coffee machine.

«МАХ» mark (pictures 1, 2).

• Fill reservoir (9) with cold water up to

• Make sure steam supply is locked by ro-

«МАХ» mark (pictures 1, 2).

tating handle (10) clockwise up to stop.

• Make sure steam supply is locked by ro-

• Switch coffee machine on using button

tating handle (10) clockwise up to stop.

(14).

• Switch coffee machine on using button

• Select steam supply mode by pressing

(14).

button (19), at that symbol (31) and rotat-

• Select hot water supply mode by press-

ing symbol (29) is flashed, when steam

ing button (19) and select symbol (32) on

supply temperature is reached, rotating

the display (6).

symbol (20) will be deemed.

• Put appropriate container for collecting

• Put appropriate container for collecting

water under cappuccinator-pipe (12)

water under cappuccinator-pipe (12)

and turn steam supply handle (10) anti-

and slightly turn steam supply handle

clockwise up to stop (picture 6).

(10) anticlockwise to release condensate

• After necessary amount of water is

(picture 6). Drain condensate out of the

poured into the container, turn off water

container.

supply by turning team supply handle

• Pour about 100 ml of milk or creams into

(10) clockwise up to stop.

7

1510.indd 71510.indd 7 02.04.2008 15:43:5902.04.2008 15:43:59