Vitek VT-1209: ENGLISH

ENGLISH

will be restored some time depend-

removed with a cloth soaked in vinegar-

ing on the position of the temperature

water solution.

regulator.

• After removing sediment, polish the sole-

plate with a dry cloth.

STEAM CHAMBER CLEANING

• Do not use abrasive substances to clean

To prolong lifetime of the iron we recom-

the soleplate and body of the iron.

mend cleaning the steam chamber, espe-

• Avoid touching the iron soleplate with

cially in the regions with “hard” water.

sharp metal objects.

• Set the steam supply regulator (3) to the

steam release OFF position.

STORAGE

• Fill the water tank (10) till the MAX mark

• Turn the temperature regulator (11) anti-

(12).

clockwise till MIN position, set the steam

• Put the iron on the base (8).

release regulator (3) to the steam release

• Insert the power plug into the outlet.

OFF position.

• Set the temperature regulator (11) to the

• Remove the power plug from the outlet.

MAX. temperature: “max” the (9) indica-

• Open the water tank lid (2), turn over the

tor will light up.

iron and pour out any remaining water

• When the soleplate temperature (13)

from the water tank (10).

reaches the desired temperature point,

• Close the lid (2).

the (9) indicator will go out, you can start

• Set the iron vertically and allow it to cool

cleaning of the iron chamber.

completely.

• Unplug the iron, set the temperature reg-

• Keep iron at dry cool place in vertical po-

ulator (11) to the «MIN» position.

sition out of the reach of children.

• Pull the plug out of the socket.

• Hold the iron above the sink, press and

TECHNICAL CHARACTERISTICS

hold the button (14).

Power requirements: 220-240 V ~ 50 Hz

• Boiling water together with scale will be

Power consumption: 1850-2200 W

throwing out from the openings in the

iron soleplate (13).

Specifications subject to change without

• Slightly sway the iron back and forth, un-

prior notice.

til water goes out of the water tank (10).

• Place the iron on the base (8) and let it

MINIMUM SERVICE LIFE - 3 YEARS

cool down completely.

• When the soleplate (13) cools down com-

GUARANTEE

pletely, wipe it with a dry cloth.

Details regarding guarantee conditions can

• Before you take the iron for storing, make

be obtained from the dealer from whom

sure that there is no water in the water

the appliance was purchased. The bill of

tank (10) and that the iron soleplate (13)

sale or receipt must be produced when

is completely dry.

making any claim under the terms of this

guarantee.

CARE AND CLEANING

• Before cleaning the iron, make sure that it

This product conforms to the

is turned off and has cooled completely.

EMC-Requirements as laid down

• Wipe the iron's outer surface with a damp

by the Council Directive 89/336/

cloth and then wipe dry.

EEC and to the Law Voltage

• Sediment on the iron soleplate can be

Regulation (73/23 EEC)

7

VT-1209.indd 7VT-1209.indd 7 11.08.2009 15:20:0511.08.2009 15:20:05