Vitek VT-1209: ENGLISH

ENGLISH

of fabric), the (9) indicator will light up.

• Set the temperature regulator (11) to the

• When the soleplate temperature (13)

required ironing temperature: “•••” or

reaches the desired temperature value,

“max”, the (9) indicator will light up.

the (9) indicator will go out, you can start

• When the soleplate temperature (13)

ironing.

reaches the desired temperature point,

the (9) indicator will go out, you can start

Note: While steam ironing set the tem-

ironing.

perature «•••» or «МАХ».

• Turn the steam supply regulator (3) to set

the intensity of steaming, steam will start

WATER SPRAYER

outgoing from the openings of the sole-

• You can dampen the fabric by pressing

plate (13).

the spray button (4) several times.

• When you finish ironing set the (11) regu-

• Make sure that there is enough water in

lator to the “min” position and the steam

the water tank (10).

supply regulator (3) to the left position.

• Pull the plug out of the socket and let the

IRONING

iron cool down completely.

• Place the iron on the base (8).

• Insert the power plug into the outlet.

ATTENTION!

• Set the temperature regulator (11) to the

If during the operation steam is not con-

required ironing temperature: “•”, “••”,

stantly supplied, check whether the tem-

“•••” or “max” (depending on the type

perature regulator (11) is set properly.

of fabric), the (9) indicator will light up.

• When the soleplate temperature (13)

ADDITIONAL STEAM RELEASE

reaches the desired temperature point,

Additional steam release function is useful

the (9) indicator will go out, you can start

when ironing folds and can only be used at

ironing.

high ironing temperatures (when the iron

• When you finish ironing set the (11) regu-

temperature regulator (11) is set to “•••”

lator to the “min” position.

or “max”).

• Pull the plug out of the socket and let the

• When the additional steam release but-

iron cool down completely.

ton (5) is pressed, steam will be vigor-

ously released from the openings in the

STEAM IRONING

iron soleplate.

For steam ironing set the temperature reg-

ulator to «•••» or «МАХ». The iron has an

Note: In order to avoid leakage of water

anti-drop valve, which stops water supply,

from steam openings, press the addi-

when the soleplate temperature is too low

tional steam supply button (5) with 4-5

it prevents the appearance of drops out of

sec. interval.

the soleplate openings (13). While heat-

ing or cooling down of the soleplate (13),

AUTO-SWITCH OFF FUNCTION

you will hear clicks of opening/closing of

If the iron is about 30 seconds in the hori-

the anti-drop valve it means that the valve

zontal position or about 8 minutes in the ver-

works normally.

tical position it will switch off automatically.

• Place the iron on the base (8).

To switch on the iron, just start ironing.

• Insert the power plug into the outlet.

• Make sure that there is enough water in

Note: After switching on of the iron the

the water tank (10).

preset temperature of the iron soleplate

6

VT-1209.indd 6VT-1209.indd 6 11.08.2009 15:20:0511.08.2009 15:20:05