Samsung LE-19 A656A1D: Checking the Signal Information

Checking the Signal Information: Samsung LE-19 A656A1D

Checking the Signal Information

You can get information about the signal status.

DTV

Signal Information

Service: ?

1. Press the MENU button to display the menu.

Service ID:0000



Multiplex: ? (TSID 0000, ONID 0000)

Network: ? (ID 0000)

ENTER button.

Bit error level: 10

2.

Press the  button to select "Setup", then press the

Signal Strength: 0

ENTER button.

Move Enter Return

3. 

Return

ENTER

button.

4. ENTER

button.

5. Press the EXIT button to exit.

If the signal status is poor, the "No signal." message is displayed.

Upgrading the Software

To keep your product up-to-date with new Digital Television

DTV

System

features then software upgrades are periodically broadcast as

Product Information

part of the normal Television signal.

Signal Information

It will automatically detect these signals and display the

Software Upgrade

software upgrade banner. You are given the option to install the

Reset

upgrade.

1. Press the MENU button to display the menu.



Move Enter Return

ENTER button.

2. Press the button to select "Setup", then press the

DTV

Software Upgrade

ENTER button.

Software Information

Manual Upgrade

3. Press the  button to select "System", then press the

Standby Mode upgrade : On

ENTER

button.

4. Press the  button to select "Software Upgrade",

then press the ENTER

button.

5.

Press the







Move Enter Return

Press the ENTER button.

Software Information

Press the ENTER button, then the current software version is shown. To display the software

version information, press the ENTER button again.

To switch to an alternative version, press the red button.

Press the blue button to reset, activate the upgrade and restart.

Manual Upgrade

Press the ENTER

button to search for new software from the currently broadcasting channels.

Standby Mode Upgrade: On / Off

Press the ENTER

button. To continue software upgrade with master power on, Select On



automatically conducted. Since the power of the unit is turned on internally, the screen may be on

slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software

upgrade is completed.

6. Press the EXIT button to exit.

English - 42

Оглавление