Pioneer FH-X360UB: Using this unit Using this unit Frequently used menu

Section

02

Using this unit

Using this unit

Frequently used menu

! This unit’s AF (alternative frequencies

Searching for an RDS station by PTY information

REGIONAL (regional)

search) function can be turned on and off.

operations

1 Press

(list).

AF should be off for normal tuning operation

When AF is used, the regional function limits the

2 Turn M.C. to select a program type.

(refer to AF (alternative frequencies search)

selection of stations to those broadcasting region-

Returning to the previous display

NEWS/INFO—POPULAR—CLASSICS—

on page 4).

al programs.

Returning to the previous list (the folder one level

OTHERS

1 Press M.C. to turn the regional function on or

higher)

3 Press M.C. to begin the search.

Storing and recalling stations

off.

1 Press

/DIMMER.

The unit searches for a station broadcasting

for each band

that type of program. When a station is found,

LOCAL (local seek tuning)

Returning to the ordinary display

its program service name is displayed.

Canceling the main menu

Using preset tuning buttons

Local seek tuning allows you to tune in to only

! To cancel the search, press M.C. again.

1 Press BAND.

those radio stations with sufficiently strong sig-

1 To store: Press and hold down one of the

! The program of some stations may differ

nals for good reception.

Returning to the ordinary display from the list

preset tuning buttons (1/

to 6/ ) until

from that indicated by the transmitted PTY.

1 Press M.C. to select the desired setting.

1 Press BAND.

the number stops flashing.

! If no station is broadcasting the type of

FM: OFF—LV1—LV2—LV3—LV4

program you searched for, NOT FOUND is

MW/LW: OFF—LV1 —LV2

2 To recall: Press one of the preset tuning

displayed for about two seconds and then

The highest level setting allows reception of

buttons (1/

to 6/ ).

the tuner returns to the original station.

Radio

only the strongest stations, while lower levels

allow the reception of weaker stations.

Basic operations

Switching the display

PTY list

TA (traffic announcement standby)

For more details about PTY list, visit the follow-

Selecting a band

Selecting the desired text information

ing site:

1 Press M.C. to turn traffic announcement

1 Press BAND until the desired band (FM1,

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or

http://www.pioneer.eu/eur/products/25/121/tech/

standby on or off.

FM2, FM3 for FM or MW/LW) is displayed.

frequency)

CarAudio/PTY.html

AF (alternative frequencies search)

Switching preset stations

! BRDCST INFO (program service name/PTY

1 Press c or d.

information)

Function settings

1 Press M.C. to turn AF on or off.

! Select PCH (preset channel) under SEEK to

! CLOCK (source name and clock)

use this function.

1 Press M.C. to display the main menu.

NEWS (news program interruption)

Notes

Manual tuning (step by step)

2 Turn M.C. to change the menu option

1 Press M.C. to turn the NEWS function on or

! If the program service name cannot be ac-

1 Press c or d.

and press to select FUNCTION.

off.

quired in FREQUENCY, the broadcast fre-

! Select MAN (manual tuning) under SEEK to

quency is displayed instead. If the program

use this function.

SEEK (left/right key setting)

service name is detected, the program serv-

3 Turn M.C. to select the function.

Seeking

Once selected, the following functions can be

You can assign a function to the left and right keys

ice name will be displayed.

1 Press and hold c or d, and then release.

of the unit.

! Depending on the band, text information can

adjusted.

You can cancel seek tuning by briefly pressing

Select MAN (manual tuning) to tune up or down

be changed.

# If MW/LW band is selected, only BSM, LOCAL

c or d.

! Text information items that can be changed

and SEEK are available.

manually or select PCH (preset channel) to switch

While pressing and holding c or d, you can

between preset channels.

depend on the area.

skip stations. Seek tuning starts as soon as

BSM (best stations memory)

1 Press M.C. to select MAN or PCH.

you release c or d.

Using PTY functions

BSM (best stations memory) automatically stores

Notes

You can tune in to a station using PTY (program

the six strongest stations in the order of their sig-

! For details about SEEK, refer to SEEK (left/

type) information.

nal strength.

1 Press M.C. to turn BSM on.

right key setting) on page 4.

To cancel, press M.C. again.

4

En