Pioneer DEH-1610: Audio Adjustments

Section

06

Audio Adjustments

! When EQ FLAT is selected no supplement

Fine adjusting equalizer curve

or correction is made to the sound. This is

You can adjust the center frequency and the Q

useful to check the effect of the equalizer

factor (curve characteristics) of each currently

curves by switching alternatively between

selected curve band (EQ-L/EQ-M/EQ-H).

EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Level (dB)

Press EQ repeatedly to switch between the fol-

lowing equalizers:

Q=2W

Q=2N

SPR-BASSPOWERFULNATURAL

VOCALCUSTOMEQ FLAT

Center frequency

Frequency (Hz)

Adjusting equalizer curves

1 Press AUDIO and hold until frequency

and the Q factor (e.g., F- 80 Q 1W) appears

You can adjust the currently selected equalizer

in the display.

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

2 Press AUDIO to select the desired band

for adjustment.

1 Press AUDIO to select EQ.

LowMidHigh

Press AUDIO until EQ appears in the display.

3 Press c or d to select the desired fre-

2 Press c or d to select the equalizer

quency.

band to adjust.

Press c or d until the desired frequency ap-

Each press of c or d selects equalizer bands

pears in the display.

in the following order:

Low: 4080100160 (Hz)

EQ-L (low)EQ-M (mid)EQ-H (high)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

3 Press a or b to adjust the level of the

equalizer band.

4 Press a or b to select the desired Q fac-

Each press of a or b increases or decreases

tor.

the level of the equalization band.

Press a or b until the desired Q factor ap-

+6  6 is displayed as the level is increased

pears in the display.

or decreased.

2N1N1W2W

# You can then select another band and adjust

the level.

Note

Note

If you make adjustments when a curve other than

CUSTOM is selected, the newly adjusted curve

If you make adjustments when a curve other than

will replace the previous curve. Then a new curve

CUSTOM is selected, the newly adjusted curve

with CUSTOM appears on the display while se-

will replace the previous curve. Then a new curve

lecting the equalizer curve.

with CUSTOM appears on the display while se-

lecting the equalizer curve.

12

En