Vitek VT-1463: ENGLISH

Vt-1463.qxd 08.02.05 9:56 Page 2

ENGLISH

3. Insert the plug into wall outlet. The blender

Max. power: 300 W

is ready for operation.

Intervals: 1 min. operation/ 10 min. break.

4. Put the attachment into the products you

intend to process and press On/Off Button

The manufacturer reserves the right to

(2) (fig. C).

change the characteristics of the device

5. After the use, unplug the unit, turn the

without prior warning.

attachment clockwise and remove (fig. B).

Service life of the unit not less than 3

You may use the blender with the utensils

years

holding the prepared products.

GUARANTEE

ATTENTION: NEVER OPERATE THE

Details regarding guarantee conditions can

BLENDER, IF YOU ARE SIMULTANEOUSLY

be obtained from the dealer from whom the

PREPARING THE PRODUCT.

appliance was purchased. The bill of sale or

receipt must be produced when making any

Intervals

claim under the terms of this guarantee.

Do not run the unit for more than 1 minute at

a time, then let the motor cool for about 10

This product conforms to the

minutes.

EMC-Requirements as laid down

by the Council Directive

Cleaning

89/336/EEC and to the Law

Voltage Regulation (73/23 EEC)

Unplug the unit before cleaning.

1. Remove the attachment.

2. Wash the attachment in warm, soapy

water, then rinse and allow to dry.

3. Wipe the main body of blender with damp

cloth.

Operation Tips

Discoloration of plastic parts may occur after

processing foods with strong color pigments

(carrots, beet, etc.).

Use cloth soaked in cooking oil to remove any

such spots.

Troubleshooting

If the blender does not operate:

- Make sure the plug is inserted into the wall

outlet. Check the outlet for voltage by con-

necting any other appliance.

In case of any faults, refer to the authorized

service center.

SPECIFICATIONS

Power requirements: 220-230 V ~ 50-60 Hz

2