Pioneer MVH-150UBG: Operating this unit Operating this unit

Black plate (7,1)

Section

Operating this unit

Operating this unit

02

SLA (source level adjustment)

LANGUAGE (multi-language)

Switching the dimmer setting

SP-P/O MODE (rear output and preout setting)

English

SLA (Source level adjustment) lets you adjust the

This unit can display the text information from a

You can adjust the brightness of illumination.

The rear speaker leads output and the RCA output

volume level of each source to prevent radical

compressed audio file even for information em-

of this unit can be used to connect a full-range

changes in volume when switching between sour-

bedded in English or Russian.

1 Press M.C. to display the main menu.

speaker or subwoofer. Select a suitable option for

ces.

! If the embedded language and the selected

your connection.

! Settings are based on the FM volume level,

language setting are not the same, text infor-

2 Turn M.C. to display ILLUMI and press to

1 Press M.C. to display the setting mode.

which remains unchanged.

mation may not display properly.

select.

2 Turn M.C. to select the desired setting.

! The MW/LW volume level can also be adjusted

! Some characters may not be displayed prop-

You can select any one of the options in the fol-

with this function.

erly.

3 Press M.C. to select the desired setting.

lowing list:

! When selecting FM as the source, you cannot

1 Turn M.C. to select the desired setting.

OFF (off)—ON (on)

! REAR/SUB.W – Select when there is a full-

switch to SLA.

ENG (English)—РУС (Russian)

! You can also change the dimmer setting by

range speaker connected to the rear speak-

1 Press M.C. to display the setting mode.

pressing and holding

/DIMMER.

er leads output and there is a subwoofer

CLOCK SET (setting the clock)

2 Turn M.C. to adjust the source volume.

connected to the RCA output.

Adjustment range: +4 to –4

! SUB.W/SUB.W – Select when there is a

1 Press M.C. to display the setting mode.

Initial menu

subwoofer connected directly to the rear

2 Press M.C. to select the segment of the clock

1 Press and hold SRC/OFF until the unit

speaker leads output without any auxiliary

display you wish to set.

System menu

amp and there is a subwoofer connected

Hour—Minute

turns off.

to the RCA output.

3 Turn M.C. to adjust the clock.

Important

2 Press and hold SRC/OFF until the main

! REAR/REAR – Select when there is a full-

PW SAVE (power saving) is canceled if the ve-

12H/24H (time notation)

menu appears in the display.

range speaker connected to the rear speak-

hicle battery is disconnected and will need to be

er leads output and the RCA output.

turned back on once the battery is reconnected.

1 Press M.C. to select the desired setting.

3 Turn M.C. to change the menu option

If there is a full-range speaker connected to

When PW SAVE (power saving) is off, depend-

12H (12-hour clock)—24H (24-hour clock)

and press to select INITIAL.

the rear speaker leads output and the RCA

ing on connection methods, the unit may con-

AUTO PI (auto PI seek)

output is not used, you may select either

tinue to draw power from the battery if your

4 Turn M.C. to select the initial menu func-

REAR/SUB.W or REAR/REAR.

vehicle’s ignition doesn’t have an ACC (acces-

The unit can automatically search for a different

tion.

sory) position.

station with the same programming, even during

Once selected, the following initial menu func-

preset recall.

tions can be adjusted.

System menu

1 Press M.C. to display the main menu.

1 Press M.C. to turn Auto PI seek on or off.

AUX (auxiliary input)

FM STEP (FM tuning step)

1 Press and hold SRC/OFF until the unit

2 Turn M.C. to change the menu option

turns off.

and press to select SYSTEM.

Activate this setting when using an auxiliary de-

Normally, the FM tuning step employed by seek

vice connected to this unit.

tuning is 50 kHz. When AF or TA is on, the tuning

2 Press and hold SRC/OFF until the main

3 Turn M.C. to select the system menu

1 Press M.C. to turn AUX on or off.

step automatically changes to 100 kHz. It may be

menu appears in the display.

function.

preferable to set the tuning step to 50 kHz when

PW SAVE (power saving)

Once selected, the following system menu func-

AF is on.

3 Turn M.C. to change the menu option

tions can be adjusted.

Switching this function on enables you to reduce

! The tuning step remains at 50 kHz during man-

and press to select SYSTEM.

the consumption of battery power.

ual tuning.

! Turning on the source is the only operation al-

1 Press M.C. to select the FM tuning step.

4 Turn M.C. to select the system menu

lowed when this function is on.

50 (50 kHz)—100 (100 kHz)

function.

1 Press M.C. to turn the power save on or off.

Once selected, the following system menu func-

tions can be adjusted.

For details, refer to System menu on page 7.

En

7

<QRB3391-A>7